SN74BCT29821NT [Texas Instruments]

SN74BCT29821NT Overview

It is packaged in the way of 24-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is 0°C~70°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74BCT series. Its output frequency should not exceed 125MHz. D latch consists of 1 elements. It consumes 10mA of quiescent current without being affected by external factors. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74BCT29821 family. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 5.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of BCT/FBT. This electronic part is mounted in the way of Through Hole. It is designed with 24 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage should be maintained at 5V for high efficiency. The output current of 48mA makes it feature maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74BCT29821NT Features

Tube package
74BCT series
24 pins
5V power supplies

SN74BCT29821NT Applications

There are a lot of Texas Instruments
SN74BCT29821NT Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer