TLC7725IP [Texas Instruments]

TLC7725IP Overview

As you can see, this power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. Supply voltage (Vsup) should be at least 2V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. A Through Hole mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 9μA supply current present in the power management. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using TLC7725, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA.

TLC7725IP Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7725IP Applications

There are a lot of Texas Instruments
TLC7725IP Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system