TPS2010ADR [Texas Instruments]

TPS2010ADR Overview

The LED driver's packaged as a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.This object belongs to the TPS2010 family.It contains 8 terminations.For operation, 8 pins are used.The LED driver has 1 functions.The maximum output current drops to 200mA in order to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.There are 8 pins in total on this board.There is 30mOhm resistance on the LED driver.It is set to 200mA in this case.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.In order to maximize efficiency, the supply voltage should be set at 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.The minimum input voltage is 2.7V volts.It requires 73?A current to operate.With 1 inputs, it is equipped.

TPS2010ADR Features

Supplied from 3.3V
Resistance of 30mOhm
1 channels

TPS2010ADR Applications

There are a lot of Texas Instruments
TPS2010ADR Power Switches ICs applications.

• Portable GPS Device
• Set-top-box
• USB Power Distribution
• Notebook PC
• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power