ALD1712PAL [Unknown]

ALD1712PAL Overview

A 8-DIP (0.300, 7.62mm) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 250μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 800μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 70°C. The operating supply voltage of the buffer op amp is rated at 5V. As a recommendation, this electronic component should be used with a power supply that can deliver 800μA. The dual supply voltage of 6V should be used for the conduct of this electronic component.

ALD1712PAL Features

107.96dB voltage gain
Output Type: Rail-to-Rail

ALD1712PAL Applications

There are a lot of Advanced Linear Devices Inc.
ALD1712PAL Instrumentational OP Amps applications.

• Addition operation circuits
• Subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement