ALD4501PEL [Unknown]

ALD4501PEL Overview

The timer clock is suitable for 20-DIP (0.300, 7.62mm) package. The programmable timer's frequency is set to 2MHz. It is used to pack in Tube case. Through Hole is the recommended mounting type. The programmable timer can supply a voltage of 2V~12V. The type of chips can be divided into 555 Type, Timer/Oscillator (Quad). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Through Hole. To keep the clock timer's supply current at 150?A. The operating supply voltage is rated at 150?A voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 20 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 4.

ALD4501PEL Features

Operate frequency at 2MHz
Package / Case: Tube
Mounting Type:Through Hole
Current - Supply?150?A
Max Operating temperature at 0°C
4 Timers/Counters

ALD4501PEL Applications

There are a lot of Advanced Linear Devices Inc.
ALD4501PEL Programmable Timers & Oscillators applications.

• Battery Powered Systems
• Internet of Things (IoT)
• Intruder Detection
• Tamper Detection
• Home Automation Sensors
• Thermostats
• Consumer Electronics
• Remote Sensors
• White Goods
• Electric Vehicles