MP3391EF-LF [Unknown]

MP3391EF-LF Overview

There is also a 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package that is used to save space on the board. Using this LED driver, there are 8 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Controller emerges with high efficiency and reliability.If the led driver ic is set to -20°C~85°C TA, it will work normally.Backlight has many advantages.It operates on the basis of the frequency of 280kHz.If the voltage supply is below 9V, undetermined failures may occur.It's mounted by Surface Mount.Ideally, the supply voltage should be 35V.With a minimum supply current less than 3.5mA, this device achieves high efficiency.There is no current available to supply to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 325kHz.This device has a voltage output of 11V volts.

MP3391EF-LF Features

Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -20°C~85°C TA
Frequency of 280kHz
Switching frequency of 325kHz
Output voltage of 11V

MP3391EF-LF Applications

There are a lot of Monolithic Power Systems Inc.
MP3391EF-LF LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices