DG417LDY-E3 [Vishay]

DG417LDY-E3 Overview

Presented in 8-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 8 pins are injected into the electrical part body. A SPST - NC switching circuit is used for these analog switches. Using the DG417 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 18.5Ohm. For details about the functions of 8 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 2.7V is the lowest voltage the electrical component should receive. For this digital switch to work, 1?A current would suffice. Putting voltage greater than 1?A on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 6V. With dual power supplies, you should attach at least 3V. The 1 inputs need to be operated in order to work. A Drain to Source resistance of 20Ohm is shown for this electronic part.

DG417LDY-E3 Features

Switch Circuit: SPST - NC
1?A Supply Current
Drain-to-Source resistance: 20Ohm

DG417LDY-E3 Applications

There are a lot of Vishay Siliconix
DG417LDY-E3 Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions
• Cellular phones