Name: DG613DJ
Brand: Vishay
SKU: DG613DJ

Type

Parameter

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

16-DIP (0.300, 7.62mm)

Number of Pins

Weight

1.627801g

Operating Temperature

-40°C~85°C TA

Packaging

Tube

Published

2009

JESD-609 Code

Pbfree Code

Part Status

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

Resistance

45Ohm

Terminal Finish

Tin/Lead (Sn/Pb)

Max Power Dissipation

470mW

Number of Functions

Pin Count

Number of Outputs

Number of Circuits

Max Supply Voltage

18V

Min Supply Voltage

10V

Analog IC - Other Type

SPST

Power Dissipation

470mW

Turn On Delay Time

35 ns

Voltage - Supply, Single/Dual (±)

10V~18V ±10V~15V

Supply Type

Dual, Single

Bandwidth

500MHz

Turn-Off Delay Time

25 ns

Max Dual Supply Voltage

15V

On-State Resistance (Max)

45Ohm

Min Dual Supply Voltage

10V

Multiplexer/Demultiplexer Circuit

2:2

Current - Leakage (IS(off)) (Max)

250pA

Channel Capacitance (CS(off), CD(off))

3pF 2pF

Switch Circuit

DPDT

Switch Time (Ton, Toff) (Max)

35ns, 25ns

Charge Injection

4pC

Crosstalk

-87dB @ 10MHz

Switching

BREAK-BEFORE-MAKE

Drain to Source Resistance

45Ohm

Height

3.81mm

Length

21.33mm

Width

7.11mm

REACH SVHC

Unknown

Radiation Hardening

RoHS Status

RoHS Compliant

DG613DJ Overview

Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:2. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. Electronic part bodies are injected with 16 pins. DPDT switching circuits are used in these analog switch ics. A 1 circuit is present in this switch device. Internally, this switch multiplexer has a resistance of 45Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 18V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 10V. It may damage the digital multiplexer if the voltage is higher than 1?A. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 15V. If you are using a dual power supply, you should attach at least 10V. There is an analog IC SPST integrated with this board. 500MHz bandwidths enable data to be transferred. Drain to Source resistance for this electronic component is 45Ohm. The analog switch ics includes 4 outputs.