Name: NE5532DR
Brand: Texas Instruments
SKU: NE5532DR

Номер детали

Тип

Параметр

Manufacturer:

Texas Instruments

Product Category:

Operational Amplifiers - Op Amps

Number of Channels:

2 Channel

GBP - Gain Bandwidth Product:

10 MHz

SR - Slew Rate:

9 V/us

Vos - Input Offset Voltage:

4 mV

Ib - Input Bias Current:

800 nA

Supply Voltage - Max:

30 V

Supply Voltage - Min:

10 V

Operating Supply Current:

8 mA

Output Current per Channel:

38 mA

CMRR - Common Mode Rejection Ratio:

100 dB

en - Input Voltage Noise Density:

5 nV/sqrt Hz

Package / Case:

SOIC-8

Mounting Style:

SMD/SMT

Shutdown:

No Shutdown

Minimum Operating Temperature:

0 C

Maximum Operating Temperature:

+ 70 C

Series:

NE5532

Packaging:

MouseReel

Amplifier Type:

Low Noise Amplifier

Brand:

Texas Instruments

In - Input Noise Current Density:

2.7 pA

Maximum Dual Supply Voltage:

+/- 15 V

Minimum Dual Supply Voltage:

+/- 5 V

Product:

Operational Amplifiers

Product Type:

Op Amps - Operational Amplifiers

Subcategory:

Amplifier ICs

Technology:

Bipolar

Unit Weight:

0.002561 oz

Number of channels

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

GBW (typ) (MHz)

Slew rate (typ) (V/µs)

Rail-to-rail

Vos (offset voltage at 25°C) (max) (mV)

Iq per channel (typ) (mA)

Vn at 1 kHz (typ) (nV√Hz)

Features

Standard Amps

THD + N at 1 kHz (typ) (%)

0.002

Rating

Catalog

Operating temperature range (°C)

0 to 70

Iout (typ) (A)

0.038

Architecture

Bipolar

CMRR (typ) (dB)

100

Input bias current (max) (pA)

800000

PDIP (P)

8 92.5083 mm² 9.81 x 9.43

SOIC (D)

8 29.4 mm² 4.9 x 6

SOP (PS)

8 48.36 mm² 6.2 x 7.8

Нет подробной информации о товаре

Equivalent Input Noise Voltage: 5nV/√ Hz Typ at 1kHz
Unity-Gain Bandwidth: 12MHz Typ
Common-Mode Rejection Ratio: 100dB Typ
High DC Voltage Gain: 100V/mV Typ
High Slew Rate: 5V/µs Typ

Key Features

1. Dual operational amplifier in one package
NE5532DR integrates two independent op amp channels in a single SOIC-8 package, saving PCB space and reducing component count in stereo audio, filter, and signal-conditioning designs.

2. Low-noise performance
The device is known for low input noise, with typical equivalent input noise around 5nV/√Hz at 1kHz, making it suitable for audio preamplifiers and low-level analog signal paths.

3. 10MHz unity-gain bandwidth
The 10MHz unity-gain bandwidth supports audio and moderate-speed analog applications with good frequency response and stable closed-loop performance.

4. High 9V/µs slew rate
The typical 9V/µs slew rate helps the amplifier handle fast-changing audio and analog signals with lower slew-induced distortion.

5. Wide 30V supply capability
The part supports up to a 30V total supply span, allowing use with common dual analog rails such as ±12V or ±15V in audio and instrumentation systems.

6. High output-drive capability
TI’s datasheet highlights high output-drive capability, which makes the device useful for driving following analog stages, filters, and moderate loads in audio circuits.

7. Low distortion for audio use
The NE5532 family is widely used in audio circuits because it combines low noise, low distortion, high slew rate, and good output swing characteristics.

8. Internally compensated for unity-gain operation
The amplifier is internally compensated, simplifying circuit design and allowing stable use in common buffer and gain configurations.

9. Standard SOIC-8 package
The SOIC-8 package is easy to source, easy to assemble, and widely used in analog audio and industrial PCB designs. TI lists NE5532DR in an 8-pin SOIC D package.

Applications

NE5532DR is widely used in circuits that require low noise, good audio performance, and stable analog signal amplification.

Application Area	Typical Use
Audio equipment	Preamplifiers, mixers, equalizers, active crossovers, tone control circuits
Professional audio systems	Low-noise line-level amplification and signal buffering
Active filters	Low-pass, high-pass, band-pass, and audio filter stages
Instrumentation circuits	Low-noise analog signal conditioning
Consumer electronics	Audio signal paths in amplifiers, players, speakers, and media devices
Communication equipment	Analog signal amplification and filtering
Test and measurement equipment	Signal conditioning and buffer amplifier stages
Industrial analog boards	General-purpose precision analog amplification and filtering