Circuit Breakers & Accessories

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers designed for the international market, UL Recognized (UL1077 and UL1500), CSA Accepted and VDE approved.

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers designed for the international market, UL Recognized (UL1077 and UL1500), CSA Accepted and VDE approved, with ratings up to 50 amps.

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers designed for the international market, rated up to 50 amps, with UL, CSA, and VDE approvals.

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers are designed for the international market with UL, CSA, and VDE approvals, featuring ratings up to 50 amps.

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers designed for the international market, UL Recognized (UL1077 and UL1500), CSA Accepted and VDE approved, with ratings up to 50 amps.

W58 series push-to-reset thermal circuit breakers with 0.5A to 30A ratings for overcurrent protection.

Compact, push-to-reset thermal circuit breaker for overcurrent protection.

Rocker-Actuated Thermal Circuit Breaker/Power Switch with optional indicator lamp, providing circuit protection and power switching in a single unit.

W28 series Push to Reset Fuseholder-Type Thermal Circuit Breaker

W28 series Push to Reset Fuseholder-Type Thermal Circuit Breaker

The TVW Series provides protection for motors and other sensitive loads by continuously measuring the voltage of each of the three phases using a microcontroller circuit design that senses under and overvoltage, voltage unbalance, phase loss, and phase reversal.

The TVW Series Provides protection for motors and other sensitive loads.

Low cost go/no go current detection with solid-state output for PLC digital input modules.

Special-Purpose Ground-Fault Circuit Interrupter (GFCI) for Class C and Class D applications.

Industrial Shock Block (ISB) is a personnel protection device designed to meet UL 943C requirements for special-purpose GFCIs, available in Class C and Class D.

Industrial Shock Block (ISB) is a personnel protection device designed to meet the new requirements for special-purpose GFCIs defined by UL 943C. ISB is the first permanently connected Class C and Class D GFCI on the market.

Industrial Shock Block (ISB) is a personnel protection device designed to meet UL 943C requirements for special-purpose GFCIs.

Industrial Shock-Block (ISB) is a personnel protection device designed to meet UL 943C requirements for special-purpose GFCIs and EGFPDs, available in Class C and Class D.

Industrial Shock Block (ISB) is a personnel protection device designed to meet the new requirements for special-purpose GFCIs defined by UL 943C. ISB is the first permanently connected Class C and Class D GFCI on the market.

Industrial Shock Block (ISB) is a personnel protection device designed to meet UL 943C requirements for special-purpose GFCIs, available as Class C and Class D GFCI or as EGFPD with adjustable settings.

Industrial Shock Block (ISB) is a personnel protection device designed to meet the new requirements for special-purpose GFCIs defined by UL 943C.

Industrial Shock Block (ISB) is a personnel protection device designed to meet UL 943C requirements for special-purpose GFCIs, available as Class C and Class D GFCIs or as an EGFPD.

Industrial Shock-Block (ISB) is a personnel protection device designed to meet UL 943C for special-purpose GFCIs, available in Class C and Class D for industrial applications.

Schottky barrier rectifier diodes with peak reverse voltage from 20V to 100V and average forward current of 3.0A.

Solid-state, plug-in current sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, Plug-in Current Sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, plug-in current sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, plug-in current sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, Plug-in Current Sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, plug-in current sensor for motor overcurrent protection and 3-phase AC current detection. DIN sized (48 mm x 96 mm).

Solid-state, plug-in current sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, Plug-in Current Sensor for motor overcurrent protection and 3-phase AC current detection. Available in inverse-type, start-up lock type, and instantaneous type over-current sensors, and instantaneous type under current sensor.

Solid-state, plug-in current sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, plug-in current sensor for motor overcurrent protection and 3-phase AC current detection.

Solid-state, Plug-in Current Sensor for motor overcurrent protection and 3-phase AC current detection.

50MM2 DIRECT-FEED TERMINAL (1000

1-PHASE LOW-PROFILE FEEDER TERMI

3M PanelSafe Lockout System mechanically prevents breaker handles from moving from off to on position with energy isolating lockout pins, complying with OSHA 1910.147.

Littelfuse fuse block covers protect personnel from accidentally contacting energized contacts. They are available for Class H, R, J, and CD type fuses up to 100 amps.

The MAX20404/MAX20405/MAX20406/MAX20406E ICs are tiny, low EMI emission, synchronous Silent Switcher® buck converters with integrated high-side and low-side switches. The ICs are designed to deliver up to 6A with wide input voltages range from 3V to 36V.

W6/W9 series Magnetic Hydraulic P&B Circuit Breakers designed for the international market with UL Recognized, CSA Accepted, and VDE approved certifications.

The LSR-xxx Series load sensors use current levels to determine feed rates, tool wear, loss of prime on pumps, mixer viscosity and all types of overload and underload conditions.

Littelfuse fuse block covers protect personnel from accidentally coming into contact with energized parts.

Littelfuse fuse block covers protect personnel from accidentally coming into contact with energized parts. Covers are for use with Littelfuse UL class fuse blocks.

Class J fuse holders with 600V rating and 30A/60A options, featuring dead front safety and LED indication.

Littelfuse Class J POWR-SAFE Dead Front holders provide optimum protection to personnel and are UL Listed and CSA Certified.

Class J fuse holders with dead front design for safety, rated up to 600V and 60A.

Will dispense butt-cut and die-cut material.

Three-phase Voltage, Asymmetry, and Phase-sequence Phase-loss Relay for monitoring 3-phase power supplies in industrial facilities and equipment.

Three-phase Voltage, Asymmetry, and Phase-sequence Phase-loss Relay K8DS-PZ for monitoring 3-phase power supplies in industrial facilities and equipment.