Power Management Modules

The XRP7620 is a multi purpose 4-channel independently adjustable current sink driver.

The XRP7613 is a non-synchronous step down converter with integrated FET optimized to drive high power LEDs at up to 1.2A of continuous current.

The XRP7604 is a non-synchronous voltage mode PWM step down converter with integrated high side FET optimized to drive high power LEDs at up to 1A of continuous current.

The XRP7603 is a non-synchronous voltage mode PWM step down converter with integrated high side FET optimized to drive high power LEDs at up to 2A of continuous current.

The XRP6840 is a controlled-current dual-cell supercapacitor charger and high power LED driver.

2 x 24 W LED driver board slight for VLSL30, VLSL31

The TPS92311 is an off-line converter specifically designed to drive high power LEDs for lighting applications.

The TPS92311 is an off-line converter specifically designed to drive high power LEDs for lighting applications.

The TPS92070EVM-682 evaluation module (EVM) is a low-power isolated flyback converter that provides 5 on-board LEDs with 370 mA of drive current from a nominal 115-VAC input.

Fixed frequency synchronous boost dc-dc converter with integrated down conversion mode for driving high power white LEDs.

TLC5946EVM-274 Evaluation Module for the TLC5946 16-channel constant-current LED driver.

The TLC5943EVM-274 is an evaluation module for the TLC5943, a 16-channel, constant-current LED driver capable of driving up to 50mA per channel.

The Texas Instruments TLC5942 is a 16-channel, constant-current LED driver that can drive up to 50mA per channel.

The TLC5940EVM-106 is an evaluation module for the TLC5940, a 16-channel constant current LED driver. The EVM contains three TLC5940 ICs in series to drive 16 RGB LEDs.

The SP7686/SP7686A are current regulated charge pumps ideal for powering high power, high brightness LEDs for camera FLASH applications of up to 500mA.

The SP7686/SP7686A are current regulated charge pumps ideal for powering high power, high brightness LEDs for camera FLASH applications of up to 500mA.

2.7V to 4.2V Input Range, Typical 200mA Torch or 1000mA Flash Output Current

The SP7648 is an ultra-low quiescent current, high efficiency step-up DC-DC converter ideal for single cell Li-Ion or dual cell alkaline battery applications to drive various LEDs.

The SP7619 is a linear low-side, constant-current driver designed to drive high power LEDs from an input voltage rail.

The SP7616 is a 30V 4-Channel linear low side LED driver.

The SP7601 is a high current DC to DC Switching Buck LED Driver with low component count and high efficiency.

The SP712X driver’s family provides a simple solution for a matched current source for any color common cathode LEDs.

The SP712X driver's family provides a simple solution for a matched current source for any color common cathode LEDs.

The SP7121 LED driver provides a simple solution for a matched current source for any color common cathode LEDs.

SP712X driver family provides a matched current source for common cathode LEDs.

The SP6887 is a 4-channel charge pump white LED driver.

The SP6699 is an inductor-based DC/DC converter designed to drive up to six white LEDs in series for LCD modules and keypad backlighting functions.

The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications.

The SP6685 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications.

SP6683 1X/1.5X High Efficiency Charge Pump LED Driver for Flash or Backlight

The SP6648 is an ultra-low quiescent current, high efficiency step-up DC-DC converter.

The SP6137 is a 900kHz constant frequency, voltage mode, synchronous PWM step down controller optimized for high efficiency.

A 600kHz constant frequency, voltage mode, synchronous PWM step down controller optimized for high efficiency.

2-Phase Stepper Motor Unipolar Driver ICs

SLA/SMA6820MH series are high voltage 3-phase motor driver ICs in which transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated.

SLA7070M series unipolar 2-phase stepping motor driver ICs.

2-Phase Stepper Motor Unipolar Driver ICs for 2-Phase/1-2 Phase Excitation

SKKT 27, SKKT 27B, SKKH 27 Thyristor modules in SEMIPACK 1 package.

SKKT 27, SKKT 27B, SKKH 27 Thyristor Modules in SEMIPACK 1 package.

SEMITOP 2 Antiparallel Thyristor Module

The SCM1270MF series are high voltage 3-phase DIP33 motor drivers with highly integrated transistors, pre-drive circuits, and bootstrap circuits.

The SCM1200MF series are high voltage 3-phase motor driver ICs in which transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated.

The SCM1200MF series are high voltage 3-phase motor driver ICs in which transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated. These products can run on a 3-shunt current detection system and optimally control the inverter systems of medium-capacity motors that require universal input standards.

This engineering report describes a 48 V, 150 W reference design power supply for 90 VAC - 265 VAC LED street lights which can also serve as a general purpose evaluation board for the combination of a PFS power factor stage with an LCS output stage using devices from the Power Integration's HiperPFS and HiperLCS device families.

Non-isolated LED driver using LinkSwitch-PL LNK458KG, providing 130 mA constant current output at 35 V for E17 lamp replacement, with power factor correction and high efficiency.

LinkSwitch-PL Family LED Driver IC with TRIAC Dimming, Single-Stage PFC and Constant Current Control for Non-Isolated Applications

A 5 W dimmable, non-isolated LED driver with power factor correction using LinkSwitch-PL LNK457DG, providing constant current output for A19 incandescent lamp replacement.

The document describes a high power-factor TRIAC dimmable LED driver designed to drive a nominal LED string voltage of 28 V at 0.5 A from an input voltage range of 90 VAC to 265 VAC. The LED driver utilizes the LNK406EG from the LinkSwitch-PH family of ICs.

Selection guide for motion and motor control solutions including servo drives, motors, inverters, encoders, and controllers.

The G Series AC Servomotors and Servo Drives provide a wide variation of models with functions and performance demanded in servo systems, featuring easy adjustment, quick vibration suppression, and built-in MECHATROLINK communications interface.