Sensor Development Tools

Vinco Touch-Key Shield is designed to interface to the FTDI Vinco USB development module to demonstrate how the VNC2 device can enable the Open Accessory Mode in compatible Android devices and transfer data to and from the Android device over USB to allow touch key pad operation.

VCNL4030X01 integrates a proximity sensor (PS), ambient light sensor (ALS), and a high power IRED into one small package. It incorporates photodiodes, amplifiers, and analog to digital converting circuits into a single chip by CMOS process.

VCNL36687S integrates a proximity and a high power VCSEL (vertical-cavity surface-emitting laser) into one small package. It incorporates photodiodes, amplifiers, and analog to digital converting circuits into a single chip by CMOS process.

This user's guide describes the evaluation GUI and PCB board design for Si70xx evaluation kits.

Si7013 temperature and humidity sensor evaluation kits (Si7013EVB-UDP and Si7013EVB-UDP-F960) with hardware and software for sensor evaluation and data logging.

User's guide for Si70xx evaluation tools, describing the evaluation kits and GUI for Si70xx sensors.

The SDV series voltage sensor provides overvoltage and undervoltage monitoring for AC and DC inputs, with selectable detection ranges from 4 mV to 300 V and various control power supply options.

Voltage Sensor for overvoltage and undervoltage monitoring, with relay output for AC and DC input.

Voltage sensor for overvoltage and undervoltage monitoring with relay output for AC/DC input, detecting from 4 mV to 300 V.

The SDV series voltage sensor provides overvoltage and undervoltage monitoring for AC and DC input, with selectable functions and a range of supply voltage configurations.

The SensorShare™ SDAWIR03 Demonstration Kit demonstrates using the IDT ZWIR4512 6LoWPAN Low-Power Wireless Module in the Sensor Cube to communicate humidity, temperature, and flow sensor measurement data to the kit’s 6LoWPAN-WiFi Hub, which functions as a WiFi hub, allowing a linked device to display and graph the measured data in real time.

The SensorShare™ SDAWIR03 Demonstration Kit demonstrates using the IDT ZWIR4512 6LoWPAN Low-Power Wireless Module in the Sensor Cube to communicate humidity, temperature, and flow sensor measurement data to the kit’s 6LoWPAN-WiFi Hub, which functions as a WiFi hub, allowing a linked device to display and graph the measured data in real time.

The OPB350 series liquid sensor is designed to work with 1/16” [1.6mm] 1/8” [3.2mm], 3/16” [4.8 mm] and 1/4” [6.3 mm] outside diameter clear tubes.

OPB350 / OCB350 Series liquid sensors are designed to work with clear tubes of various diameters (1/16", 1/8", 3/16", 1/4") and provide fluid presence detection with optional calibration circuit.

The OPB350 series liquid sensor is designed to work with clear tubes of various diameters (1/16”, 1/8”, 3/16”, 1/4”).

The OPB350 series liquid sensor is designed to work with 1/16” [1.6mm] 1/8” [3.2mm], 3/16” [4.8 mm] and 1/4” [6.3 mm] outside diameter clear tubes.

The MPU-6000 and MPU-6050 are 6-axis motion tracking devices that combine a 3-axis gyroscope and a 3-axis accelerometer.

MPU-6000/MPU-6050: 6-axis motion tracking device (3-axis gyro + 3-axis accelerometer) with integrated Motion Processing Unit and support for I2C/SPI (MPU-6000) or I2C (MPU-6050).

Precision dual remote diode temperature sensor with SMBus interface and TruTherm technology.

The LM95221 is a dual remote diode digital temperature sensor in an 8-lead MSOP package. It measures the temperature of its own die and two remote diode-connected transistors with programmable resolution.

Digital temperature sensor with SensorPath bus interface in MSOP8 package.

The LDS6200 Family of capacitive touch controllers enables streamlining of the human-machine interface through the implementation of touch-based user inputs such as touch buttons, sliders, and scroll wheels.

PureTouch® Capacitance Touch IC Family with Integrated LED Drivers. The IDT LDS6100/6120 family of PureTouch® controllers empower system designers to create streamlined, attractive and reliable product designs with capacitive touch controls.

MPR084 Evaluation Kit for Proximity Sensors

The MPR083 is an Inter-Integrated Circuit Communication (I2C) driven Capacitive Touch Sensor Controller, optimized to manage an 8-position rotary shaped capacitive array.

The MMA7361L is a low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a 1-pole low pass filter, temperature compensation, self test, 0g-Detect which detects linear freefall, and g-Select which allows for the selection between 2 sensitivities.

Evaluation boards for Freescale's multi-axis (X, Y, Z) analog output accelerometers (MMA73x0L series) with variable capacitance sensing in LGA-14 package.

This application note describes the MMA7360L (1.5g & 6g), MMA7340L (3g & 11g) and MMA7330L (4g & 12g) evaluation boards for Freescale’s multi-axis (X, Y, Z) analog output LGA-14 packaged 3x5x1 mm3 variable capacitance sensing accelerometers.

The ISL78010 is a multiple output regulator for use in all TFT-LCD automotive applications. It features a single boost converter with an integrated 2A FET, two positive LDOs for VON and VLOGIC generation, and a single negative LDO for VOFF generation.

The ISL29125 is a low power, high sensitivity, RED, GREEN and BLUE color light sensor (RGB) with an I2C (SMBus compatible) interface.

The ISL29038 is a low power Ambient Light Sensor (ALS) and proximity (PROX) sensor. It has a built-in IR-LED driver for proximity function.

The ISL29035 is an integrated ambient and infrared light-to-digital converter with I2C (SMBus Compatible) Interface.

The ISL29030A is an integrated ambient and infrared light-to-digital converter with a built-in IR LED driver and I2C Interface (SMBus Compatible).

ISL29028 is an integrated ambient and infrared light-to-digital converter with a built-in IR LED driver and I2C Interface (SMBus Compatible).

Evaluation hardware and software manual for ambient light and proximity sensors.

The ISL29021 is an integrated proximity and infrared sensor with a built-in IR LED driver and I2C Interface (SMBus - Works Under Direct Sunlight Compatible). This device provides infrared sensing to allow proximity estimation featured with interrupt function.

The ISL29020 is a low power, high sensitivity, integrated light-sensor with I2C (SMBus Compatible) interface.

ISL29015 is an integrated ambient and infrared light sensor with proximity sensing, featuring ambient IR cancellation during proximity sensing and an I2C/SMBus interface.

The ISL29013 is an integrated light sensor with I2C interface.

The ISL29012 is an integrated light sensor with I2C (SMBus Compatible) interface. It has an internal signed 15-bit integrating type ADC designed based on the charge-balancing A/D conversion technique.

ISL29010 is an integrated light sensor with I2C interface.

The ISL29009 is a light-to-current silicon optical sensor combining a photodiode and current amplifiers on a single monolithic IC. Similar to human eyes, the photodiode has peak sensitivity at 550nm and spans from 400nm to 700nm, rejecting UV light and IR light.

The ISL29006, ISL29007, and ISL29008 are light-to-current silicon optical sensors combining a photodiode array and a current amplifier on a single monolithic IC.

ISL29001 is an integrated ambient light sensor with ADC and I2C interface.

The ISL29000 is a light-to-current optical sensor combining a photodiode and a current amplifier on a single monolithic IC.

The Honeywell HMC5843 is a surface mount multi-chip module designed for low field magnetic sensing with a digital interface for applications such as low cost compassing and magnetometry.

The HEDS-973X is a high performance incremental encoder module for rotary or linear position detection.

The HEDS-973x series is a high performance, low cost, optical incremental encoder module.

The HDC1000EVM is a plug-and-play evaluation kit for testing and evaluating the HDC1000 humidity and temperature sensor.

GP2Y1001AU Compact Dust Sensor for Air Conditioners