Sensor Hardware & Accessories

THERMISTOR NTC 10KOHM 3380K 0603.NTC Thermistor 10k 0603 (1608 Metric)

THERMISTOR NTC 10KOHM 3380K 0402.NTC Thermistor 10k 0402 (1005 Metric)

SENSOR 17.4PSIA 24BIT 8VLGA.Pressure Sensor 4.35PSI ~ 17.4PSI (30kPa ~ 120kPa) Absolute 24 b 8-VFLGA

The BMI088 is a high-performance Inertial Measurement Unit. Allowing for highly accurate measurements of orientation and detection of motion along three orthogonal axes. The BMI088 is the ideal IMU solution for drone and robotics applications. High performance Vibration robustness Optimised for drones and robotics

High-Precision 6-Axis MEMS MotionTracking® Device 6-Axis High performance IMU supporting highly accurate external clock input, that helps to reduce system level sensitivity error, improve orientation measurement from gyroscope data, reduce ODR sensitivity to temperature and device to device variation. The ICM-42688-P is a 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3C℠, I²C, and SPI serial communication. It features a 2 kB FIFO and 2 programmable interrupts with ultra-low-power wake-on-motion support to minimize system power consumption. ICM-42688-P supports highly accurate external clock input, that helps to reduce system level sensitivity error, improve orientation measurement from gyroscope data, reduce ODR sensitivity to temperature and device to device variation. The device includes industry first 20-bits data format support in FIFO for high-data resolution. This FIFO format encapsulates 19-bits of gyroscope data and 18-bits of accelerometer data. Other industry-leading features include InvenSense on-chip APEX Motion Processing engine for gesture recognition, activity classification, pedometer, programmable digital filters, and an embedded temperature sensor. The device supports a VDD operating range of 1.71V to 3.6V, and a separate digital IO supply, VDDIO from 1.71V to 3.6V.

High-Performance 6-Axis MotionTracking® IMU Accelerometer, Gyroscope, Temperature, 6 Axis Sensor I2C, SPI Output IMUs - Inertial Measurement Units Low-Power, Premium Performance 6-Axis MotionTracking IMU with I3C, I2C and SPI interface in 2.5mm x 3mm Package

IMUs - Inertial Measurement Units 6-Axis MEMS Motion Tracking Device Low Power 6-Axis MotionTracking Device

IMU (inertial measurement unit) with machine learning core and finite state machine with digital output for industrial applications ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes. The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the characteristics of the sensing element. In the ISM330DHCX the sensing elements of the accelerometer and of the gyroscope are implemented on the same silicon die, thus guaranteeing superior stability and robustness. The ISM330DHCX has a full-scale acceleration range of ±2/±4/±8/±16 g and a wide angular rate range of ±125/±250/±500/±1000/±2000/±4000 dps that enable its usage in a broad range of applications. All the design aspects and the calibration of the ISM330DHCX have been optimized to reach superior accuracy, stability, extremely low noise and full data synchronization. An unmatched set of embedded features (Machine Learning Core, programmable FSM, FIFO, sensor hub, event decoding and interrupts) are enablers for implementing smart and complex sensor nodes which deliver high performance at very low power. The ISM330DHCX is available in a 14-lead plastic land grid array (LGA) package.

IMU ACCEL/GYRO I2C/SPI 24QFN.Accelerometer, Gyroscope, 6 Axis Sensor I2C, SPI Output