Analog Devices

Analog Devices ADG1208YRUZ-REEL7 is an 8-channel iCMOS® analog multiplexer featuring 8:1 signal routing, 120Ω on-resistance, <1pC charge injection, 1pF off capacitance, 550MHz bandwidth, rail-to-rail signal handling, ±15V dual supply operation, and a 16-lead TSSOP package. Designed for precision data acquisition, automated test equipment, industrial measurement, communication systems, medical electronics, and analog signal routing applications, the ADG1208YRUZ-REEL7 provides reliable, low-distortion, and low-power analog switching performance.

Analog Devices AD8552ARZ-REEL is a precision zero-drift dual CMOS operational amplifier featuring 1µV offset voltage, 0.005µV/°C offset drift, rail-to-rail input/output operation, 130dB CMRR and PSRR performance, 1.5MHz gain bandwidth product, 0.4V/µs slew rate, and 2.7V to 5V single-supply operation. Designed for temperature sensors, pressure sensors, strain gauge amplifiers, precision current sensing, medical instrumentation, and data acquisition systems, the AD8552ARZ-REEL delivers ultra-high DC accuracy, low noise, and long-term stability in an 8-lead SOIC package.

Analog Devices AD8221ARZ-R7 is a precision programmable gain instrumentation amplifier featuring adjustable gain from 1 to 1000, 825kHz bandwidth, 80dB minimum CMRR at 10kHz, 8nV/√Hz low input noise, low offset voltage, high input impedance, and wide ±2.3V to ±18V supply operation. Designed for strain gauges, bridge sensors, industrial instrumentation, biomedical equipment, aerospace measurement systems, and precision data acquisition applications, the AD8221ARZ-R7 delivers accurate, low-noise differential signal amplification in an 8-lead SOIC package.

The ADUM121N1BRZ-RL7 is an Analog Devices dual-channel digital isolator based on iCoupler® magnetic isolation technology. Designed for high-speed signal isolation applications, the device provides 150Mbps data transmission, 3000Vrms isolation voltage, 75kV/µs common-mode transient immunity, low propagation delay, and wide 1.7V to 5.5V supply compatibility in a compact SOIC-8 package. The ADUM121N1BRZ-RL7 is ideal for industrial automation, motor-control systems, power converters, isolated communication interfaces, renewable energy equipment, and high-reliability embedded electronic systems requiring fast and robust digital isolation.

Analog Devices AD7190BRUZ-REEL 24-Bit Ultra-Low Noise Sigma-Delta ADC with PGA The Analog Devices AD7190BRUZ-REEL is a high-precision 24-bit Sigma-Delta ADC featuring ultra-low noise performance, integrated programmable gain amplifier, flexible differential input configuration, and SPI/DSP-compatible digital interface. Designed for industrial measurement, load cell systems, temperature monitoring, precision instrumentation, and sensor data acquisition applications, the AD7190BRUZ-REEL provides exceptional accuracy and stability for demanding analog measurement systems.

Analog Devices AD8221ARZ-R7 is a precision programmable gain instrumentation amplifier featuring adjustable gain from 1 to 1000, 825kHz bandwidth, 80dB minimum CMRR at 10kHz, 8nV/√Hz low input noise, low offset voltage, high input impedance, and wide ±2.3V to ±18V supply operation. Designed for strain gauges, bridge sensors, industrial instrumentation, biomedical equipment, aerospace measurement systems, and precision data acquisition applications, the AD8221ARZ-R7 delivers accurate, low-noise differential signal amplification in an 8-lead SOIC package.

Analog Devices AD8606ARZ-REEL7 is a precision dual CMOS operational amplifier featuring DigiTrim® technology, 80µV maximum offset voltage, 8nV/√Hz low noise density, rail-to-rail input/output operation, 10MHz gain bandwidth product, 5V/µs slew rate, 2.7V to 5.5V single-supply operation, and an 8-lead SOIC package. Designed for sensor signal conditioning, precision instrumentation, photodiode amplification, active filters, battery-powered devices, and data acquisition systems, the AD8606ARZ-REEL7 delivers accurate, low-noise, and energy-efficient analog signal processing performance.

Analog Devices AD8253ARMZ-R7 is a programmable gain instrumentation amplifier featuring selectable gains of 1, 10, 100, and 1000, 10MHz bandwidth, 20V/µs slew rate, 100dB common-mode rejection ratio, 150µV maximum offset voltage, low distortion, and MSOP-10 packaging. Designed for precision data acquisition, industrial sensors, biomedical equipment, automated test systems, and signal conditioning applications, the AD8253ARMZ-R7 provides accurate, flexible, and high-performance analog amplification for demanding measurement systems.

The AD9361BBCZ is a high-performance 2 × 2 RF Agile Transceiver™ manufactured by Analog Devices Inc. Designed for software-defined radio and broadband wireless systems, it integrates dual receivers, dual transmitters, 12-bit ADCs, 12-bit DACs, RF front-end circuitry, frequency synthesizers, and a flexible digital baseband interface. Supporting a TX frequency range from 47MHz to 6.0GHz, an RX frequency range from 70MHz to 6.0GHz, TDD and FDD operation, and tunable channel bandwidth from less than 200kHz to 56MHz, the AD9361BBCZ is ideal for SDR platforms, 3G/4G radio systems, base stations, test and measurement equipment, industrial wireless systems, aerospace and defense radios, and advanced RF communication designs.

Analog Devices AD8656ARZ-REEL7 is a low-noise precision dual CMOS operational amplifier featuring DigiTrim® technology, 2.7 nV/√Hz voltage noise density, 250µV maximum offset voltage, rail-to-rail input/output operation, 28MHz gain bandwidth product, 11V/µs slew rate, and 2.7V to 5.5V supply operation. Designed for ADC/DAC buffering, precision filters, industrial controls, audio systems, automotive electronics, and data acquisition applications, the AD8656ARZ-REEL7 delivers high accuracy, low distortion, and reliable analog signal processing performance in an 8-lead SOIC package.

Analog Devices ADXL345BCCZ-RL7 is a low-power 3-axis digital MEMS accelerometer featuring selectable ±2g, ±4g, ±8g, and ±16g measurement ranges, up to 13-bit resolution, SPI and I²C interfaces, integrated FIFO memory, and advanced motion detection functions. Supplied in a compact 14-pin LGA package, the ADXL345BCCZ-RL7 is designed for wearable devices, IoT equipment, industrial monitoring systems, consumer electronics, and embedded motion-sensing applications requiring accurate and efficient acceleration measurement.

Analog Devices AD9364BBCZ is a high-performance RF Agile Transceiver™ integrating a 1 × 1 RF transceiver, 12-bit ADCs, 12-bit DACs, programmable baseband processing, and frequency synthesizers. Supporting 70 MHz to 6 GHz operation, TDD/FDD modes, and adjustable channel bandwidths from below 200 kHz to 56 MHz, the AD9364BBCZ is designed for software-defined radios, wireless infrastructure, defense communication systems, industrial wireless networks, and advanced RF applications requiring flexible and highly integrated transceiver performance.

The HMC7992LP3DETR is an Analog Devices silicon SP4T RF switch IC designed for high-performance RF signal routing applications from 100MHz to 6GHz. Featuring a nonreflective 50Ω architecture, 0.6dB insertion loss, 45dB isolation, 35dBm P1dB compression, 58dBm IIP3, 33dBm through-path power handling, TTL/CMOS/1.8V compatible control logic, and a compact 16-lead 3mm × 3mm LFCSP package, the ADI HMC7992LP3DETR is ideal for cellular infrastructure, wireless communication equipment, automotive telematics, mobile radios, SDR platforms, and RF test systems requiring reliable high-linearity RF switching.

The AD590MF/883B is a military-grade precision temperature sensor from Analog Devices, providing a linear current output of 1 µA/K proportional to absolute temperature. Designed for aerospace, defense, and high-reliability industrial applications, it operates over a wide -55°C to +150°C temperature range with a 4V to 30V supply voltage. Packaged in a rugged flatpack and qualified to 883B military standards, it is ideal for remote temperature sensing, avionics, satellite systems, industrial monitoring, and precision instrumentation applications.

LTC3787HUFD#WTRPBF is a PolyPhase synchronous boost DC/DC controller manufactured by Analog Devices / Linear Technology. Featuring a two-phase single-output boost architecture, external N-channel MOSFET drive, synchronous rectification, 4.5V to 38V input supply range, operation down to 2.5V after start-up, output voltage capability up to 60V, ±1% 1.200V reference, RSENSE or inductor DCR current sensing, constant-frequency current mode control, programmable switching frequency, and compact 28-lead QFN 4mm × 5mm package, it is suitable for high-power boost converters, industrial power supplies, telecom equipment, battery-powered systems, transportation electronics, backup power systems, and high-current step-up DC/DC power designs.

AD823ARZ-R7 is a dual 16MHz rail-to-rail FET input operational amplifier manufactured by Analog Devices Inc. Featuring two amplifier channels, FET-input architecture, rail-to-rail output swing, 16MHz bandwidth, fast slew rate, low supply current, industrial temperature operation, and compact SOIC-8 surface-mount package, it is suitable for sensor signal conditioning, high-impedance analog front ends, ADC input buffering, active filters, portable instruments, battery-powered devices, industrial measurement systems, and embedded analog circuits. The AD823ARZ-R7 provides reliable Analog Devices op amp performance for compact, low-power, and high-impedance signal-chain designs.

AD8429ARZ-R7 is a low-noise precision instrumentation amplifier manufactured by Analog Devices. Featuring 1nV/√Hz input noise, 15MHz bandwidth, 22V/µs slew rate, high CMRR, wide ±4V to ±18V supply operation, and compact SOIC-8 surface-mount package, it is suitable for sensor signal conditioning, bridge measurement, strain gauge interfaces, load cells, medical instrumentation, industrial data acquisition, vibration monitoring, laboratory equipment, and precision analog front-end circuits. The AD8429ARZ-R7 delivers high accuracy, low noise, and reliable Analog Devices instrumentation amplifier performance for demanding small-signal measurement applications.

DS1302ZN+T&R is an Analog Devices / Maxim Integrated trickle-charge real-time clock chip in an 8-SOIC package. It integrates a clock/calendar, 31 bytes of static RAM, a simple 3-wire serial interface, 12/24-hour time format support, automatic month-end adjustment, leap-year correction, and a programmable trickle charger for backup battery or supercapacitor operation. It is suitable for embedded systems, consumer electronics, industrial control, data loggers, energy meters, security systems, battery-backed devices, and MCU-based products requiring reliable real-time clock and calendar functions.

AD8031ARTZ-REEL7 is an Analog Devices single high-speed rail-to-rail input/output voltage-feedback operational amplifier in a compact SOT-23-5 package. It features 80MHz bandwidth, fast 30V/µs to 35V/µs slew rate, low 800µA to 900µA supply current, 15mA output drive, 2.7V to 12V supply operation, and fast settling performance. It is well suited for battery-powered instruments, portable electronics, ADC driver circuits, active filters, sensor signal conditioning, video and imaging circuits, communication equipment, industrial embedded systems, and test and measurement applications.

IC VREF SERIES 0.33% 8SOIC.Series Voltage Reference IC Fixed 3V V ±0.33% 30 mA 8-SOIC

Programmable Resolution 1-Wire Digital Thermometer High-Precision Temperature Monitoring with Minimal Connections Ideal for Multisensor Systems

The LTC®5510 is a high linearity mixer optimized for applications requiring very wide input bandwidth, low distortion, and low LO leakage. The chip includes a double-balanced active mixer with an input buffer and a high speed LO amplifier. The input is optimized for use with 1:1 transmissionline baluns, allowing very wideband impedance matching. The mixer can be used for both up- and down-conversion and can be used in wideband systems. The LO can be driven differentially or single-ended and requires only 0dBm of LO power to achieve excellent distortion and noise performance, while also reducing external drive circuit requirements. The LTC5510 offers low LO leakage, greatly reducing the need for output filtering to meet LO suppression requirements. The LTC5510 is optimized for 5V but can also be used with a 3.3V supply with slightly reduced performance. The shutdown function allows the part to be disabled for further power savin

DC DC CONVERTER 4X0.6-5.5V.Non-Isolated PoL Module DC DC Converter 4 Output 0.6 ~ 5.5V 0.6 ~ 5.5V 0.6 ~ 5.5V 0.6 ~ 5.5V 4A, 4A, 4A, 4A 4V - 14V Input

IC ADC 14BIT PIPELINED 196BGA.14 Bit Analog to Digital Converter 2 Input 2 Pipelined 196-BGA-ED (12x12)

IC FANOUT DIST 32LFCSP.Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF) IC 4.4GHz 1 32-VFQFN Exposed Pad, CSP

90ns, 60ns SPST - NC 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG431 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference

IC DDS 12BIT 88LFCSP.Direct Digital Synthesis IC 12 b Tuning 88-LFCSP-VQ (12x12)

Description: General-Purpose Timers, 8-SOIC_N-150_MIL, 8 Pins, -40 to 85C

IC PLL FREQ SYNTHESIZER 24LFCSP.IC 13GHz 1 24-WFQFN Exposed Pad, CSP

IC INST AMP 1 CIRCUIT 8SOIC.Instrumentation Amplifier 1 Circuit 8-SOIC

IC OPAMP DIFF 1 CIRCUIT 16LFCSP.Differential Amplifier 1 Circuit Differential 16-LFCSP-VQ (3x3)

IC RF AMP GPS 6GHZ-17GHZ 16QFN.RF Amplifier IC General Purpose 6GHz ~ 17GHz 16-QFN (3x3)

RF ATTENUATOR 31.5DB 50OHM 24QFN.RF Attenuators 0.5dB ~ 31.5dB 0 Hz ~ 3.8 GHz 50 Ohms 560mW 24-VFQFN Exposed Pad

IC SW SPST-NO/NCX4 5OHM 16SOIC.4 Circuit IC Switch 1:1 5Ohm 16-SOIC

IC VOLTAGE FEEDBACK 2 CIRC 8SOIC.Voltage Feedback Amplifier 2 Circuit 8-SOIC

8KB 8K x 8 FLASH 8052 8-Bit Microcontroller MicroConverter® ADuC8xx Series ADUC814 28 Pin 16.78MHz 3V 28-TSSOP (0.173, 4.40mm Width)

IC CLOCK GENERATOR 48LFCSP.Clock Generator, Fanout Distribution IC 2.65GHz 1 48-VFQFN Exposed Pad, CSP

IC TRANSMITTER 4-20MA 16-SOIC

8 Terminations 3.3V 8 Pin MAX3075 Receivers 1 Bits 1/1 Drivers/Receivers 1 Functions

Fanout Buffer (Distribution) 4.5GHz Clock Generators 52-WFQFN Exposed Pad Surface Mount 3.15V~3.45V Tube

IC FANOUT DIST 24LFCSP.Fanout Distribution, Integer N Synthesizer (RF) IC 1.8GHz 1 24-WFQFN Exposed Pad, CSP

IC AUDIO PROC 2ADC/4DAC 48-LQFP

Tape & Reel (TR) 10-WFDFN Exposed Pad Controller (PD) 1 -40°C~85°C 40V~60V MAX5969 10 DUAL

DC DC CNVRTR 4X0.6-5.5V.Non-Isolated PoL Module DC DC Converter 4 Output 0.6 ~ 5.5V 0.6 ~ 5.5V 0.6 ~ 5.5V 0.6 ~ 5.5V 1.2A, 1.2A, 1.2A, 1.2A 2.7V - 17V Input

IC INTEGER-N/FRACTIONAL 24QFN.Integer-N/Fractional-N IC 8GHz 1 24-VFQFN Exposed Pad

IC RF TXRX CELLULAR 144CSPBGA.IC RF TxRx Only Cellular LTE 70MHz ~ 6GHz 144-LFBGA, CSPBGA

IC HOT SWAP CTRLR GP 32LFCSP.Hot Swap Controller, Monitor 1 Channel General Purpose 32-LFCSP (5x5)

Description: Serial Switch/Digital Sensor, 12 Bit(s), 2Cel, CMOS, Rectangular, 8 Pin, Surface Mount, 0.150 INCH, SOP-8