EXAR

The XRT91L80 is a fully integrated SONET/SDH transceiver for SONET OC-48/STM-16 applications supporting the use of Forward Error Correction (FEC) capability.

The XRT91L32 is a fully integrated SONET/SDH transceiver for SONET/SDH 622.08 Mbps STS-12/STM-4 or 155.52 Mbps STS-3/STM-1 applications.

8-channel T1/E1/J1 short-haul line interface unit with on-chip clock synthesizer.

The XRT83VSH316 is a fully integrated 16-channel short-haul line interface unit (LIU) that operates from a 1.8V Inner Core and 3.3V I/O power supplies.

The XRT83VSH28 is a fully integrated 8-channel short-haul line interface unit (LIU) that operates from a 1.8V and a 3.3V power supply.

The XRT83SH314 is a fully integrated 14-channel short-haul line interface unit (LIU) that operates from a single 3.3V power supply.

The XRT83L314 is a fully integrated 14-channel long-haul and short-haul line interface unit (LIU) that operates from a single 3.3V power supply.

The XRT83D10 is a fully integrated, single channel, Line Interface Unit (Transceiver) for 75 Ω or 120 Ω E1 (2.048 Mbps) and 100Ω DS1 (1.544 Mbps) applications.

The XRT83D10 is a fully integrated, single channel, Line Interface Unit (Transceiver) for 75 Ω or 120 Ω E1 (2.048 Mbps) and 100Ω DS1 (1.544 Mbps) applications.

The XRT75R03 is a three-channel fully integrated Line Interface Unit (LIU) featuring EXAR's R3 Technology (Reconfigurable, Relayless Redundancy) with Jitter Attenuator for E3/DS3/STS-1 applications.

The XRT75L06 is a six channel fully integrated Line Interface Unit (LIU) for E3/DS3/STS-1 applications. The LIU incorporates 6 independent Receivers, Transmitters and Jitter Attenuators in a single 217 Lead BGA package.

The XRT75L06D is a six channel fully integrated Line Interface Unit (LIU) for E3/DS3/STS-1 applications.

The XRT75L04D is a four-channel fully integrated Line Interface Unit (LIU) with Sonet Desynchronizer for E3/DS3/STS-1 applications.

The XRT71D04 is a four channel, single chip Jitter Attenuator, that meets the Jitter transfer characteristic requirements specified in the ETSI TBR-24, Bellcore GR-499 and GR-253 standards.

The XRT5997 is an optimized seven-channel analog E1 line interface unit fabricated using low power 3.3V CMOS technology.

The XRT5997 is an optimized seven-channel analog E1 line interface unit fabricated using low power 3.3V CMOS technology.

Four channel digital PWM demo boards (XRP7714EVB-DEMO-1, XRP7714EVB-DEMO-2, XRP7714EVB-DEMO-2P) that provide up to 35W with 4A per channel and adjustable outputs via I2C.

Quad Channel Digital PWM/PFM Programmable Power Management System

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7713 is a three output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7704EVB-XPM is designed to allow individuals to program the NVM (Non-Volatile Memory) in the XRP7704, XRP7708, XRP7740, and XRP7714.

The XRP6275 is an ultra low dropout voltage regulator capable of delivering 3A output currents.

The XRP6274 is an ultra low dropout voltage regulator capable of delivering 2A output currents. It is unique in the industry in being able to operate from a single supply rail of 1.045V to 2.625V without the need for a noise generating charge pump.

The XRP6142 is a synchronous step down switching controller for over 15 Amps point-of-loads converters and optimized to generate and support DDR I, II and III memory voltages requirements.

The XRP6141 is a synchronous step-down controller for point-of load supplies up to 35A. A wide 4.5V to 22V input voltage range allows for single supply operation from industry standard 5V, 12V and 19.6V rails.

Evaluation board for XRP2527 (single-channel) and XRP2528 (dual-channel) adjustable current power distribution switches.

Single/Dual Channel Adjustable Current Power Distribution Switch

Dual-channel USB 3.0 power distribution switch compliant with USB 3.0 specification.

The XRP2523 is a single channel integrated high-side power distribution switch optimized for self or bus-powered USB applications and compliant with the latest USB 3.0 specification.

A complete, low power CCD Image Digitizer with CDS, PGA and 12-bit ADC.

The XRD98L63 is a complete, low power CCD Image Digitizer for digital motion and still cameras.

The XRD98L62 is a complete, low power CCD Image Digitizer for digital motion and still cameras.

The XRD98L61 is a complete, low power CCD Image Digitizer for digital motion and still cameras.

The XRD9825 is a complete linear CIS or CCD sensor signal processor on a single monolithic chip.

The XRD9818EVAL board is designed to be a test platform that provides a means to evaluate the performance and functionality of the XRD9818ACG.

The XRD9818 is a fully integrated, high-performance analog signal processor/digitizer specifically designed for use in 3-channel/2-channel/1-channel CCD/CIS document imaging applications.

The XRD8775 is an 8-bit Analog-to-Digital Converter in a small 20-pin SOIC/SSOP package. Designed using an advanced 5V CMOS process, this part offers excellent performance, low power consumption and latch-up free operation.

The XRA1405 is a 16-bit GPIO expander with an SPI interface, featuring internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

16-bit SPI GPIO expander with integrated level shifters.

The XRA1404 is an 8-bit GPIO expander with an SPI interface. After power-up, the XRA1404 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

8-BIT SPI GPIO EXPANDER WITH INTEGRATED LEVEL SHIFTERS

The XRA1402 is an 8-bit GPIO expander with an SPI interface. After power-up, the XRA1402 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

The XRA1207 is a 16-bit GPIO expander with an I2C/SMBus interface, featuring integrated level shifters and internal pull-up resistors.

16-BIT I2C/SMBUS GPIO EXPANDER WITH INTEGRATED LEVEL SHIFTERS

The XRA1206 is an 8-bit GPIO expander with an I2C/SMBus interface.

8-bit I2C/SMBus GPIO expander with integrated level shifters.

16-BIT I2C/SMBUS GPIO EXPANDER WITH RESET

The XRA1203 is a 16-bit GPIO expander with an I2C/SMBus interface.

16-BIT I2C/SMBUS GPIO EXPANDER WITH RESET