Other Modules

The VM810C is a development module for FTDI’s FT810 Embedded Video Engine, which can be accessed with the VM810C. This module behaves as an SPI slave, and requires a SPI Master for proper micro-controller interfacing and system integration.

The VM800C is a development module for FTDI's FT800 Embedded Video Engine (EVE), providing graphic, audio, and touch features.

The VM800C is a development module for FTDI's FT800 Embedded Video Engine, behaving as an SPI slave and requiring an SPI Master for micro-controller interfacing.

The VF2F2 is a reference design for the Vinculum VNC1L. It is designed as a stand alone application which allows for the back up of files from a digital camera onto a USB Flash disk.

The VDIP2 module is an MCU to embedded USB host controller development module for the VNC1L I.C. device. The Vinculum VNC1L is the first of FTDI’s Vinculum family of Embedded USB host controller integrated circuit devices.

The VDIP1 module is an MCU to embedded USB host controller development module for the VNC1L IC device.

The V2DIP2-48 module enables rapid development using FTDI's VNC2-48Q embedded dual USB host controller IC, providing access to UART, parallel FIFO, and SPI interfaces via DIL connectors with two USB type A ports.

V2DIP2-32 module is designed to allow rapid development of designs using the VNC2-32Q IC. The V2DIP2-32 is supplied as a PCB designed to fit into a 24 pin 0.6” wide 0.1”pitch DIP socket.

V2DIP1-64 module is designed to allow rapid development of designs using the VNC2-64Q IC. The V2DIP1-64 is supplied as a PCB designed to fit into a 60 pin 0.8” wide 0.1” pitch DIP socket.

V2DIP1-48 module is designed to allow rapid development of designs using the VNC2-48Q IC. The V2DIP1-48 is supplied as a PCB designed to fit into a 24 pin 0.6” wide 0.1” pitch DIP socket.

The V2DIP1-32 is a development module for the VNC2-32Q embedded dual USB host controller IC, designed to fit into a 24-pin DIP socket for rapid development.

A hardware platform for developing embedded USB host systems based on FTDI's VNC1L devices.

The V-Eval Kit is a hardware platform that designers can use to develop embedded USB host systems based on FTDI’s VNC1L devices.

A hardware platform for developing embedded USB host systems based on FTDI's VNC1L devices.

The V-Eval Kit is a hardware platform that designers can use to develop embedded USB host systems based on FTDI’s VNC1L devices.

The UMFT602A/X is an evaluation/development module with either HSMC or FMC connectors for interfacing FTDI's FT602 32-bit FIFO bus to USB 3.1 GEN 1 USB video class bridge IC.

The UMFT602A/X is an evaluation/development module with either HSMC or FMC connectors for interfacing FTDI's FT602 32-bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC.

UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI’s FT60x USB 3.0 Superspeed IC with external hardware. UMFT60xx allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60x.

The UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI's FT60x USB 3.0 Superspeed IC with external hardware. The UMFT60xx allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60x.

UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI’s FT60x USB 3.0 Superspeed IC. It allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60x.

The UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI’s FT60x USB 3.0 Superspeed IC with external hardware. The UMFT60xx allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60x.

UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI’s FT60x USB 3.0 Superspeed IC with external hardware. UMFT60xx allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60x.

UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI's FT60x USB 3.0 Superspeed IC with external hardware.

UMFT4233HPEV is a high speed USB Type-C to Multipurpose UART/JTAG/SPI/I2C serial interface evaluation module with two Type-C™ USB PD ports.

The UMFT4222EV is a development module which uses FTDI’s FT4222H, a Hi-Speed USB2.0 to QuadSPI/I2C Bridge in compact 32-pin QFN package.

The UMFT313EV is a development module for FTDI's FT313H USB2.0 Hi-Speed Host Controller, providing three kinds of asynchronous bus interfaces to connect with a microcontroller.

The FT311D Development Module is a development module which utilises the FT311D IC to develop USB accessories connecting to Android platforms via Android Open Accessory mode.

UMFT260EV1A is an FT260 DIP development module built with a FT260, which is an HID-class USB to UART/I2C Bridge IC.

UMFT240XE is a USB to 8-bit 245 FIFO DIP module with a 0.6” row pitch.

UMFT220XA is a USB to 4-bit SPI/FT1248 DIP module with a 0.3” row pitch.

UMFT240XA is a USB to 8-bit 245 FIFO DIP module with a 0.3” row pitch.

UMFT234XD is a USB to UART breakout module utilizing FTDI's FT234XD IC to convert USB to UART.

UMFT234XD is a USB to UART breakout module that utilizes FTDI's FT234XD IC to convert USB to UART.

UMFT234XD is a USB to UART breakout module utilizing FTDI's FT234XD IC to convert USB to UART.

UMFT233HPEV-SD Sink Module Board is a high-speed USB Type-C to Multipurpose UART/JTAG/SPI/I2C serial interface module with two Type-C™ USB PD ports.

UMFT232HPEV-S Sink Module Board is a high speed USB Type-C to Multipurpose UART/JTAG/SPI/I2C serial interface module with single Type-C™ USB PD port.

UMFT231XE is a USB to serial Full-Handshake UART DIP module with a 0.6” row pitch.

UMFT231XC is a USB to UART development module with battery charging support, designed for evaluating the battery charging feature of FTDI's X-Chip range of USB-interface bridging ICs.

UMFT220XA is a USB to 4-bit SPI/FT1248 DIP module with a 0.3” row pitch. It is a development module for FTDI’s FT220XQ.

UMFT231XA is a USB to Full-Handshake UART development module designed to plug into a standard 0.3” wide 20 pin DIP socket.

Breakout modules that convert USB2.0 Full-Speed to serial interfaces (I2C, UART, FT1248) with a low profile design.

Breakout modules that convert USB2.0 Full-Speed to serial interfaces (I2C, UART, FT1248) with a low profile design.

UMFT201XB, UMFT220XB, and UMFT230XB are breakout modules that convert USB2.0 Full-Speed to serial interfaces (I2C, UART, FT1248) and connect to a 10pin female receptacle.

UMFT230XA is a USB to Basic UART DIP module with a 0.3” row pitch. It is a development module for FTDI’s FT230XQ, one of the devices from FTDI’s range of USB interface bridging integrated circuit devices.

UMFT230XA is a USB to Basic UART DIP module with a 0.3” row pitch. It is a development module for FTDI’s FT230XQ.

UMFT221XE is a USB to 8-bit SPI/FT1248 DIP module with a 0.6” row pitch. It is a development module for FTDI’s FT221XQ.

UMFT220XA is a USB to 4-bit SPI/FT1248 DIP module with a 0.3” row pitch. It is a development module for FTDI’s FT220XQ.

UMFT221XA is a USB to 8-bit SPI/FT1248 DIP module with a 0.3” row pitch. It is a development module for FTDI’s FT221XQ.

Breakout modules that convert USB2.0 Full-Speed to I2C, UART, or FT1248 interfaces, featuring low-profile design and direct USB host connection.

Breakout modules that convert USB2.0 Full-Speed to serial interfaces (I2C, UART, FT1248) and connect to a 10pin female receptacle.