Interface ICs

The XRT6164 is a CMOS analog chip intended for general purpose line interface applications at bit rates up to 1.544Mbps (T1).

XRT3591B V.35 Transceiver

The XRP7665 is a synchronous current-mode PWM step down (buck) regulator capable of a constant output current up to 3 Amps.

The XRP2525 and XRP2526 devices are respectively single and dual channel integrated high-side power distribution switches with independent enables and fault flags.

The XRA1405 is a 16-bit GPIO expander with an SPI interface and internal 100K ohm pull-up resistors on each I/O pin.

16-bit SPI GPIO expander with reset input. Features internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

The XRA1403 is a 16-bit GPIO expander with an SPI interface, featuring internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

The XRA1402 is an 8-bit GPIO expander with an SPI interface.

8-bit GPIO expander with I2C/SMBus interface and integrated level shifters.

8-bit I2C/SMBus GPIO expander with integrated level shifters.

16-bit GPIO expander with I2C/SMBus interface and internal 100K ohm pull-up resistors on each I/O pin.

The XRA1200/1200P is an 8-bit GPIO expander with an I2C/SMBus interface.

The EXAR Dual Universal Asynchronous Receiver and Transmitter (DUART) is a data communications device that provides two fully independent full duplex asynchronous communication channels in a single package.

The EXAR Dual Universal Asynchronous Receiver and Transmitter (DUART) is a data communications device that provides two fully independent full duplex asynchronous communication channels in a single package.

The XR88C92/192 is a Dual Universal Asynchronous Receiver and Transmitter with 8 (XR88C92) / 16 (XR88C192) bytes transmit and receive FIFO.

The XR88C92/192 is a Dual Universal Asynchronous Receiver and Transmitter with 8 (XR88C92) / 16 (XR88C192) bytes transmit and receive FIFO.

The XR88C92/192 is a Dual Universal Asynchronous Receiver and Transmitter with 8 (XR88C92) / 16 (XR88C192) bytes transmit and receive FIFO.

The XR16M752/XR68M752 is a high performance dual universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs.

The XR16M752/XR68M752 is a high performance dual universal asynchronous receiver and transmitter (UART) with 64-byte FIFOs.

The XR16M752/XR68M7521 (M752) is a high performance dual universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs.

XR68C681 is a UART (Universal Asynchronous Receiver/Transmitter) device.

XR68C681 Dual UART Device

The XR68C92/192 is a Dual Universal Asynchronous Receiver and Transmitter with 8 (XR68C92) / 16 (XR68C192) bytes transmit and receive FIFO. It is a pin-to-pin compatible and an improved version of the XR68C681 and the Philips SCC68692 UART with faster data access and other additional features.

The XR68C92/192 is a Dual Universal Asynchronous Receiver and Transmitter with 8 (XR68C92) / 16 (XR68C192) bytes transmit and receive FIFO.

High performance RS-485/RS-422 driver family in tiny TSOT23 package, operating from a single 3.3V supply and meeting RS-485/RS-422 standards.

The XR33152, XR33156 and XR33158 family of high performance TIA-485/TIA-422 devices are designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33152, XR33156 and XR33158 family of high performance TIA-485/TIA-422 devices are designed for improved performance in noisy industrial environments and increased tolerance to system faults.

±60V Fault Tolerant 3.0V to 5.5V TIA-485/TIA-422 Transceivers. Designed for improved performance in noisy industrial environments and increased tolerance to system faults.

High performance TIA-485/TIA-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33152, XR33156 and XR33158 family of high performance TIA-485/TIA-422 devices are designed for improved performance in noisy industrial environments and increased tolerance to system faults.

High performance TIA-485/TIA-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

A family of high performance RS-485/RS-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

±60V Fault Tolerant 3.0V to 5.5V RS-485/RS-422 Transceivers

The XR33052, XR33053, XR33055, and XR33058 (XR3305x) are a family of high performance RS-485/RS-422 devices designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33052, XR33053, XR33055, and XR33058 (XR3305x) are a family of high performance RS-485/RS-422 devices designed for improved performance in noisy industrial environments and increased tolerance to system faults.

A family of high performance RS-485/RS-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

High performance TIA-485/TIA-422 transceiver with ±60V fault tolerance and extended ±25V common mode operation for noisy industrial environments.

The XR33053 is a high performance TIA-485/TIA-422 device designed for improved performance in noisy industrial environments and increased tolerance to system faults.

±60V Fault Tolerant 3.0V to 5.5V RS-485/RS-422 Transceivers

A family of high performance RS-485/RS-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

3-Driver/5-Receiver Intelligent RS-232 Transceiver with 1.65V-5.5V Interface

3-Driver/5-Receiver Intelligent RS-232 Transceiver with 1.65V-5.5V Interface

The XR3170E - XR3178E family of RS-485 devices are designed for reliable, bidirectional communication on multipoint bus transmission lines. Each device contains one differential driver and one differential receiver.

The XR3160 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards with 15kV ESD protection.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard. Each provides transmit and receive signaling rates up to 1Mbps between a differential CAN bus and a CAN controller.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard. Each provides transmit and receive signaling rates up to 1Mbps between a differential CAN bus and a CAN controller.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard. Each provides transmit and receive signaling rates up to 1Mbps between a differential CAN bus and a CAN controller.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard. Each provides transmit and receive signaling rates up to 1Mbps between a differential CAN bus and a CAN controller.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard. Each provides transmit and receive signaling rates up to 1Mbps between a differential CAN bus and a CAN controller.