Power

The XRP9710 and XRP9711 are programmable step down power modules providing two 6A outputs. The module package contains the switching controller, power MOSFETs, inductors and support components.

The XRP9710 and XRP9711 are programmable step down power modules providing two 6A outputs. The module package contains the switching controller, power MOSFETs, inductors and support components.

XRP7724 is a quad channel Digital Pulse Width Modulated (DPWM) Step down (buck) controller.

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7704 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7704 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7704 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7704 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7664 is a synchronous current-mode PWM step down (buck) voltage regulator capable of a continuous output current up to 2Amps.

The XRP7613 is a non-synchronous step down converter with integrated FET optimized to drive high power LEDs at up to 1.2A of continuous current.

The XRP6658 is a synchronous current mode PWM step down (buck) converter capable of delivering up to 1 Amp of current and optimized for portable battery-operated applications.

XR79xxx series: 22V and 40V, 3A to 20A high-density power modules.

The XR79xxx family includes high-density power modules with input voltages up to 22V or 40V and output currents from 3A to 20A.

The XR79120 is a 20A synchronous step-down Power Module for point-of-load supplies with a wide 4.5V to 22V input voltage range.

The XR79115 is a 15A synchronous step-down Power Module for point-of-load supplies. It features a wide 5V to 22V input voltage range and proprietary Constant On-Time (COT) control.

10A synchronous step-down Power Module for point-of-load supplies with 5V to 22V input voltage range.

XR79xxx 22V and 40V, 3A to 20A High Density Power Modules

High-density power modules with 22V or 40V input, 3A to 20A output current.

The XR78021 is an integrated power stage containing a synchronous buck gate driver which is packaged with both half bridge MOSFETs designed to provide output currents up to 20Amps. Also known as “DrMOS” (Driver plus MOSFETs), the package design provides very low thermal impedance and excellent EMI performance by minimizing parasitic inductances.

The XR78021 is an integrated power stage containing a synchronous buck gate driver which is packaged with both half bridge MOSFETs designed to provide output currents up to 20Amps. Also known as “DrMOS” (Driver plus MOSFETs), the package design provides very low thermal impedance and excellent EMI performance by minimizing parasitic inductances.

The XR77129 is a quad channel digital Pulse Width Modulated (PWM) step down (buck) controller with a wide 6V to 40V input voltage range.

The XR77129 is a quad channel digital Pulse Width Modulated (PWM) step down (buck) controller. A wide 6V to 40V input voltage range allows for single supply operation from standard power rails.

The XR77128 is a quad channel digital Pulse Width Modulated (PWM) step down (buck) controller. A wide 4.75V to 5.5V and 5.5V to 25V input voltage range allows for single supply operation from standard power rails.

The XR77103-MoCA PMIC is designed to power MaxLinear’s MoCA chipsets, the MoCA 2.0 MxL370x and MoCA 2.5 MxL371x along with a single port ethernet PHY such as the GPY241.

1.5A Ultra Low Dropout Voltage Regulator capable of delivering 1.5A output from a single supply rail of 1.4V to 2.625V without requiring charge pumps or secondary bias rails.

500mA Alkaline DC/DC Boost Regulator in SOT-23 with ultra-low quiescent current and high efficiency.

The SP619 is a low Rds(on) high-current switch designed with precision current limiting to protect connected devices from damage due to short circuits or current surges.

Low Voltage, Synchronous Step Down PWM Controller ideal for 2A to 10A, small footprint, DC-DC power converters.

The SP6127 is a PWM controlled step down (buck) voltage mode regulator with VIN feedforward and internal Type-II compensation. It operates from 4.5V to 29V VIN, making it suitable for 5V, 12V and 24V applications.

The SP34063A is a monolithic switching regulator control circuit for DC-DC converters.

The SP2525A device is an integrated high-side power switch ideal for self-powered and bus-powered Universal Serial Bus (USB) applications.

The MxL7213 is a dual channel, 13A step-down power module. It includes a wide 4.5V to 16V input voltage range and supports two outputs each with an output voltage range of 0.6V to 5.3V, set by a single external resistor.

The MxL7213 is a dual channel, 13A step-down power module. It includes a wide 4.5V to 16V input voltage range and supports two outputs each with an output voltage range of 0.6V to 5.3V, set by a single external resistor.

The MxL7204 power module is a complete dual 4A or single 8A output switch mode DC/DC power supply with an input voltage of 4.5V to 20V.

Buck Adjustable 25A 600mV~1.8V 4.5V~15V BGA-144(16x16) DC-DC Converters ROHS

Buck Adjustable 25A 600mV~1.8V 4.5V~15V BGA-144(16x16) DC-DC Converters ROHS

Buck 18A 600mV~1.8V 4.5V~15V BGA-144(16x16) DC-DC Converters ROHS

PMIC

PMIC

PMIC PowerXR Series 40-WFQFN Exposed Pad

PMIC PowerXR Series 40-WFQFN Exposed Pad

PMIC 40 Pin

0.5mm PMIC 12V

PMIC 44-WFQFN Exposed Pad

PMIC 44-WFQFN Exposed Pad

PMIC 44-WFQFN Exposed Pad

PMIC 44-WFQFN Exposed Pad

PMIC 44-WFQFN Exposed Pad