NXP

The MPC8260 is a PowerQUICC II Integrated Communications Processor with a dual-issue integer core (EC603e) and a Communications Processor Module (CPM) for flexible communication protocol support.

MPC8260 PowerQUICC II Integrated Communications Processor

MPC8260 PowerQUICCII Integrated Communications Processor

The MPC823e microprocessor is a versatile, one-chip integrated microprocessor and peripheral combination that can be used in a variety of electronic products. It particularly excels in low-power, portable, image capture and personal communication products.

The X3G-OH047, X3G-OH048, X3T-OH047 and X3T-OH048 are sensitive magnetic field sensors, employing the magneto-resistive effect of thin film permalloy. The sensors contain two parallel supplied Wheatstone bridges at a relative angle of 45° to each other.

The UJA1168 is a mini high-speed CAN System Basis Chip (SBC) containing an ISO11898-2/5/6 compliant HS-CAN transceiver and an integrated 5 V/100 mA supply for a microcontroller.

The UJA1162A is a 'self-supplied' high-speed CAN transceiver integrating an ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant HS-CAN transceiver and an internal 5 V CAN supply.

The UJA1161 is a 'self-supplied' high-speed CAN transceiver integrating an ISO11898-2/5 compliant HS-CAN transceiver and an internal 5 V CAN supply. The only supply input is a battery connection. The UJA1161 can be operated in a very low-current Standby mode with bus wake-up capability.

The UJA1079A core System Basis Chip (SBC) replaces discrete components in ECUs with a LIN interface, supporting networking applications for power and sensor control.

The UJA1079A core System Basis Chip (SBC) replaces the basic discrete components commonly found in Electronic Control Units (ECU) with a Local Interconnect Network (LIN) interface.

The UJA1079A core System Basis Chip (SBC) replaces the basic discrete components commonly found in Electronic Control Units (ECU) with a Local Interconnect Network (LIN) interface. It supports networking applications used to control power and sensor peripherals by using the LIN interface as a local sub-bus.

The UJA1078 core System Basis Chip (SBC) replaces the basic discrete components commonly found in Electronic Control Units (ECU) with a high-speed Controller Area Network (CAN) and two Local Interconnect Network (LIN) interfaces.

The UJA1076 core System Basis Chip (SBC) replaces the basic discrete components commonly found in Electronic Control Units (ECU) with a high-speed Controller Area Network (CAN). The UJA1076 supports the networking applications used to control power and sensor peripherals by using a high-speed CAN as the main network interface.

The UJA1075 core System Basis Chip (SBC) replaces the basic discrete components commonly found in Electronic Control Units (ECU) with a high-speed Controller Area Network (CAN) and a Local Interconnect Network (LIN) interface.

High-speed CAN/LIN core system basis chip that replaces discrete components in ECUs.

The UJA1023 is a stand-alone Local Interconnect Network (LIN) I/O slave that replaces basic components commonly used in electronic control units for input and output handling. The UJA1023 contains a LIN 2.0 controller, an integrated LIN transceiver which is LIN2.0/ SAE J2602 compliant and LIN 1.3 compatible, a 30kΩ termination resistor necessary for LIN-slaves, and eight I/O ports which are configurable via the LIN bus.

96 kHz sampling 24-bit stereo audio ADC

A single-chip IEC60958 audio decoder with an integrated stereo DAC employing bitstream conversion techniques.

The UDA1351TS is a single chip IEC958 audio decoder with an integrated stereo DAC employing bitstream conversion techniques.

The UDA1345TS is a single-chip stereo Analog-to-Digital Converter (ADC) and Digital-to-Analog Converter (DAC) with signal processing features employing bitstream conversion techniques.

UDA1345TS Economy audio CODEC

Low-voltage low-power stereo audio CODEC with DSP features. Single-chip stereo ADC and DAC with signal processing features employing bitstream conversion techniques.

The UDA1342TS is a single-chip 4-channel ADC and 2-channel DAC with signal processing features employing bitstream conversion techniques.

The UDA1342TS is a single-chip 4-channel analog-to-digital converter and 2-channel digital-to-analog converter with signal processing features employing bitstream conversion techniques.

Multichannel audio coder-decoder with 4+1 ADCs and 6 DACs, employing bitstream conversion techniques for surround sound applications.

Low power audio DAC UDA1334TS supporting I2S-bus and LSB-justified formats with 1.8 to 3.6V power supply.

Low power audio DAC

Low power audio DAC with I2S-bus and LSB-justified format support, 1.8 to 3.6V power supply.

UDA1330ATS is a low-cost stereo filter DAC employing bitstream conversion techniques, supporting multiple digital audio formats.

The UBA2211 family of integrated circuits are a range of high voltage monolithic ICs for driving Compact Fluorescent Lamps (CFL) in half-bridge configurations.

Half-bridge power IC family for driving Compact Fluorescent Lamps (CFL) in half-bridge configurations.

The UBA2211 family of integrated circuits are a range of high voltage monolithic ICs for driving Compact Fluorescent Lamps (CFL) in half-bridge configurations.

Half-bridge power IC family for driving Compact Fluorescent Lamps (CFL) in half-bridge configurations.

Half-bridge power IC family for driving Compact Fluorescent Lamps (CFL) in half-bridge configurations.

The UBA2211 family of integrated circuits are a range of high voltage monolithic ICs for driving Compact Fluorescent Lamps (CFL) in half-bridge configurations.

Half bridge control IC for CCFL backlighting. High voltage ICs intended to drive Cold Cathode Fluorescent Lamps (CCFLs) or External Electrode Fluorescent Lamps (EEFLs) for backlighting applications.

The UBA2071 and UBA2071A are high voltage ICs intended to drive Cold Cathode Fluorescent Lamps (CCFLs) or External Electrode Fluorescent Lamps (EEFLs) for backlighting applications. They can drive a half bridge circuit made up of two NMOSFETs with a supply voltage of up to 550V, so the inverter can be supplied directly from a 400V PFC bus.

The UBA2071 and UBA2071A are high voltage ICs intended to drive Cold Cathode Fluorescent Lamps (CCFLs) or External Electrode Fluorescent Lamps (EEFLs) for backlighting applications.

The UBA2070 is a high voltage integrated circuit for driving electronically ballasted Cold Cathode Fluorescent Lamps (CCFL) at mains voltages up to 277V (RMS) (nominal value).

600 V CCFL ballast driver IC for driving Cold Cathode Fluorescent Lamps at mains voltages up to 277V (RMS).

High voltage monolithic IC for driving MOSFETs in a full bridge configuration, designed for HID general lighting applications.

High voltage integrated circuit for driving MOSFETs in a full bridge configuration.

600 V dimmable power IC for compact fluorescent lamps

The UBA20271/2 are high-voltage power ICs intended to drive and control higher powered self ballasted Compact Fluorescent Lamp (CFL) lighting applications.

600 V Driver IC for dimmable compact fluorescent lamps

The UBA20260 is a high-voltage integrated circuit designed to control high power self-ballasted Compact Fluorescent Lamp (CFL) lighting applications.

The UBA2025 is a high voltage power IC intended to drive and control a Compact Fluorescent Lamp (CFL).

The UBA2024 is a family of high-voltage monolithic Integrated Compact Fluorescent Lamp (CFL) drivers for a large range of lamp powers.

The UBA2024 is a family of high-voltage monolithic Integrated Compact Fluorescent Lamp (CFL) drivers for a large range of lamp powers.

Half-bridge power IC for CFL lamps