Embedded Solutions

TWR-VF65GS10 module for Vybrid Controller Solutions based on ARM Cortex-A5 and Cortex-M4 processors.

Demonstration Board for Freescale MC9S12G128 Microcontroller

TWR-S08DC-PT60 Tower System Daughter Card for the 5-Volt 8-bit MC9S08P family.

TWR-S08MM128 is a low-cost evaluation, demonstration and development board that features an 8-bit MC9S08MM128 microcontroller. The TWR-S08MM128 can operate stand-alone or as the main control board in a Tower System with peripheral modules.

MCF5225X ColdFire® connectivity MCUs

The MCF51JF128 is a 32-bit ColdFire V1 microcontroller with up to 50 MHz CPU, featuring analog peripherals (12-bit ADC, 12-bit DAC, comparator), multiple communication interfaces (UART, SPI, I2C, USB, I2S/SAI), and low-power modes.

The QorIQ TWR-LS1021A Tower System module is a feature-rich, high-performance platform for IoT and industrial control applications.

The QorIQ TWR-LS1021A Tower system module is the most feature-rich and high-performance Tower system offered by Freescale. It enables compatibility and interoperability with the growing list of Tower expansion modules, providing an easily accessible and interchangeable suite of capabilities and features to support rapid prototyping as well as software development programs.

The TWR-KV58F220M microcontroller module is designed to work either in standalone mode or as a part of the NXP Tower System, a modular development platform that enables rapid prototyping and tool reuse through reconfigurable hardware.

The TWR-KL28Z is a Tower development board featuring the MKL28Z512VLL7 Kinetis microcontroller with USB 2.0 OTG, operating at up to 72 MHz with 512 KB Flash.

The TWR-K65F180M Tower MCU Module is a low-cost evaluation, demonstration, and development board, which features the Kinetis 180 MHz K65 low-power MCU.

Low-power MCUs at 120 MHz with FPU, up to 1 MB Flash and up to 256 KB SRAM. Tower System Development Board Platform.

Low-power MCUs with Ethernet and USB On-The-Go. The Kinetis K series MCU portfolio offers the broadest selection of pin-, peripheral- and software-compatible MCU families based on the ARM® Cortex®-M4 core.

The Kinetis K series MCU portfolio offers the broadest selection of pin-, peripheral- and software-compatible MCU families based on the ARM® Cortex®-M4 core.

The TDA8024 is a complete and cost-efficient analog interface for asynchronous 3V or 5V smart cards.

The TDA8020HL is a one-chip dual smart card interface. Controlled by the I2C-bus, it guarantees conformity to ISO7816 or EMV2000 with very few external components.

The TDA8020HL is a one-chip dual smart card interface. Controlled by the I2C-bus, it guarantees conformity to ISO7816 or EMV2000 with very few external components.

Dual IC card interface. The TDA8020HL is a one-chip dual smart card interface.

The TDA8020HL is a one-chip dual smart card interface. Controlled by the I2C-bus, it guarantees conformity to ISO7816 or EMV2000 with very few external components.

The S32K1xx series are 32-bit ARM Cortex-M4F/M0+ microcontrollers with up to 112 MHz frequency, featuring a range of memory and analog interfaces.

S12ZVMB Family: DC Motor Control Ultra-reliable Industrial Integrated LIN PHY AEC-Q100 Grade0

S12ZVM Family 3-Phase Motor Control 6-ch. MOSFET Gate Driver with integrated LIN/CAN Phy, AEC-Q100 Grade0.

S12ZVMB family of mixed-signal microcontrollers for DC motor control with integrated LIN PHY and AEC-Q100 Grade0 qualification.

S12ZVM family mixed-signal MCUs with integrated LIN/CAN PHY and 6-channel MOSFET gate driver for 3-phase motor control applications.

The S12VR32EVB is an evaluation board for the S12VR32 microcontroller, an automotive 16-bit MCU for motor control relay applications.

The NXP ESC-MC9S08SU16 reference board is a set of hardware tools for a drone electronic speed control (ESC). It is an ideal tool for the rapid prototyping of microcontroller-based applications.

Low-cost development system for the Freescale MCF52233 ColdFire microcontroller, featuring integrated BDM and support for application development.

Low-noise amplifier evaluation board using BGU7003 matched for 868 MHz ISM band

The JN5169 is an ultra low power, high performance wireless microcontroller suitable for ZigBee applications.

The SA636 is a low-voltage high performance monolithic FM IF system with high-speed RSSI incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic Received Signal Strength Indicator (RSSI), voltage regulator, wideband data output and fast RSSI opamps.

SA636 Low voltage high performance mixer FM IF system with high-speed RSSI

MSC8144 Quad Core Digital Signal Processor with four StarCore SC3400 DSP subsystems

Quad Digital Signal Processor with four StarCore SC140 DSP extended cores.

User guide for the MPC8272ADS development board featuring the MPC8272 PowerQUICC II processor.

MPC5777M Microcontroller family targeted at automotive powertrain and chassis control applications, designed for ISO26262 ASIL-D compliance.

MPC5777M family of microcontrollers targeted at automotive powertrain and chassis control applications, designed for functional safety (ISO26262 ASIL-D).

The MPC5554 microcontroller (MCU) is a member of the MPC5500 family of microcontrollers built on the Power Architecture embedded technology.

56F8300 series hybrid controllers demonstration kit

The M68EVB912D60 Evaluation Board (EVB) is an evaluation and debugging tool for the MC68HC912D60 Microcontroller Unit (MCU).

The M68EVB912C32 is an evaluation board for the Motorola MC9S12C32 microcontroller, providing a development platform with included serial cable, software tools, examples, and debug monitor.

Development board for Motorola MC68HC908QL4 microcontroller.

HCS08 microcontrollers

The M68EVB908GB60 is an evaluation or development board for the M9S08GB60 microcontroller, providing a quick and easy development environment with included serial cable, software tools, examples, and debug monitor.

Evaluation Platform MCU 8-Bit

The ZoomTM ColdFire Development Kit is a low-cost Application Development Kit for evaluating the functionality of the ColdFire processor and Fire Engine.

Application note for Linux BSP Quick Start on MCF547x/8x microprocessors.

The ZoomTM ColdFire Development Kit is a low-cost Application Development Kit for evaluating the functionality of the ColdFire processor and Fire Engine.

The M54455EVB is an evaluation board for the MCF54455 ColdFire V4m microprocessor, which is part of the MCF5445x family.

Evaluation Platform MPU Coldfire V4

The MCF5373 is part of the MCF537x family of ColdFire microprocessors, featuring a Version 3 ColdFire variable-length RISC processor core with integrated peripherals and memories for embedded applications.