AD640BE [Analog Devices]

AD640BE Overview

There is a 20-CLCC case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Logarithmic-type. Upon delivery, op amp ic is packaged in a Tube case. 20 pins are located on the operational amplifiers. The input offset voltage is 50?V. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 44mA . This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The total number of elements in this buffer amplifier is 5. It is recommended that you use an 35mA power supply with this electrical part in order for it to operate correctly. Under 7.5V is the minimum supply voltage for this electric component. Over 4.5V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 7.5V. In order for the op amp resistance to remain within the 500kOhm range, the op amp should be tested.

AD640BE Features

Resistance of 500kOhm

AD640BE Applications

There are a lot of Analog Devices Inc.
AD640BE Instrumentational OP Amps applications.

• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation