DS4776P+ [Analog Devices]

DS4776P+ Overview

Set the frequency of the timer to 77.76MHz.It is used to pack in Tube case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 74mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVPECL. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: TRI-STATE; ENABLE/DISABLE FUNCTION. On operating frequency, it's available in the range of 77.76MHz. The digital timer has a frequency tolerance value of 0.005%. The number of the chip's terminations sums up to 10. Its subcategory belongs to Other Oscillators. The minimum supply voltage of the chip must not be lower than 3.135V. The supply voltage of this chip should not exceed 3.465V.

DS4776P+ Features

Operate frequency at 77.76MHz
Package / Case: Tube
Max Operating temperature at -40°C
Additional Feature: TRI-STATE; ENABLE/DISABLE FUNCTION

DS4776P+ Applications

There are a lot of Maxim Integrated
DS4776P+ Programmable Timers & Oscillators applications.

• Electric Vehicles
• Always On Systems
• Clutch Actuator circuit
• Car Door Handle circuit
• Smart Key
• Remote current sensor
• Intruder Detection
• Power-On Reset Timer
• Long Time One Shot
• ?Heartbeat? Timers