MAX15046AAEE+ [Analog Devices]

MAX15046AAEE+ Overview

It comes in a 16-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~40V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 100kHz~1MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including HYSTERETIC CURRENT MODE. DC switcher's input voltageis 24V volts. MAX15046 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 36V. You should note down the dc dc regulator's usual output current of 25A when you start a project. A duty cycle set at 87.5 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 1.1MHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 3.825V DOWN TO 0.6V; ALSO HAS PWM CNTRL TECH so that the need can be met more directly. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. There must be a 4.5V supply voltage. DC switcher will not be able to provide an output current above 25A volts. Its datasheet indicates the switching converter can output a maximum of 5.5V volts. voltage controllers with a minimum voltage output of 5V cannot operate.

MAX15046AAEE+ Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good
HYSTERETIC CURRENT MODE
Max Duty Cycle: 87.5 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 3.825V DOWN TO 0.6V; ALSO HAS PWM CNTRL TECH

MAX15046AAEE+ Applications

There are a lot of Maxim Integrated
MAX15046AAEE+ DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers