MAX696EPE+ [Analog Devices]

MAX696EPE+ Overview

As you can see, this power management is mounted through 16 terminals. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 16-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. According to the specification, the package's peak reflow temperature is specified to be 260. When 2 is applied to the power ic, it conducts. The mount is attached to Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. This power management has 16 pins. Supply voltage (Vsup) should be at least 3V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Through Hole mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. There is a 300μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX696, the base power ics number. A power supply of 3.3/5V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 300μA.

MAX696EPE+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 3V
300μA operating supply current

MAX696EPE+ Applications

There are a lot of Maxim Integrated
MAX696EPE+ Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system