AP4310AUMTR-E1 [DIODES]

AP4310AUMTR-E1 Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. 8 pins are located on the operational amplifiers. The input offset voltage is 500μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~105°C . The buffer amplifier is capable of operating from a supply current of 200μA . It is recommended to keep the voltage gain at 100dB at all times. This op amp contains 2 circuits. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 105°C. It is recommended that you use an 200μA power supply with this electrical part in order for it to operate correctly. Under 36V is the minimum supply voltage for this electric component. Over 3V is a recommended supply voltage for buffer amps

AP4310AUMTR-E1 Features

100dB voltage gain

AP4310AUMTR-E1 Applications

There are a lot of Diodes Incorporated
AP4310AUMTR-E1 Instrumentational OP Amps applications.

• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation