SP483CS-L [MAXLINEAR]

SP483CS-L Overview

Driver ICs with enhanced PDIP packages are excellent for driving LEDs with common characteristics.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The pinouts for this transceiver are standardized to meet the needs of the market.An enhanced power dissipation control is provided by this 8-pin driver IC.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.It is important that the operating transceiver module's temperature is below 70°C.A minimum operating temperature of 0°C should not be reached by this optical transceiver.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 0.6mA.It has the ability to drive LEDs with an input voltage of up to about 600?A with the help of this integrating circuit.This integrated circuit is rated for a transceiver's maximum supply voltage of 5.25V.An antenna transmits or sends data through 1 transmitters, which are can transceivers used to transmit radio waves to send data.There is a minimum voltage requirement of 4.75V for this line driver ic.

SP483CS-L Features

8 pin count
8 pins
5V power supply

SP483CS-L Applications

There are a lot of Exar Corporation
SP483CS-L Drivers/Receivers/Transceivers applications.

• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio