ATA6503T-4BWVAO [Microchip]

The ATA6503 is a CAN FD System Basis Chip (SBC) with a fully integrated high-speed CAN FD transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus and a low-drop voltage regulator (5V/150 mA). The transceiver is designed for high-speed CAN 2.0 and CAN FD (up to 8 Mbit/s) applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The combination of a voltage regulator and CAN FD transceiver makes it possible to develop simple but powerful nodes in CAN bus systems.

The various operating modes along with the dedicated fail-safe features make the ATA650x SBC an excellent choice for all types of CAN 2.0 and CAN FD networks.

Microchip's SBC is available in very small, space-saving packages with wettable flanks for automated optical inspection capability.

Please see the MikroElektronika click Board! https://www.mikroe.com/ata6503-click

Please see our functional safety feature page CAN/CAN FD

CAN FD Transceiver
• Fully Compliant to ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5
• Communication Speed up to 8 Mbps
• Autonomous Bus Biasing According to ISO 11898‑2:2016
• Very Low Sleep Current (typical 15 μA)
• Differential Receiver with Wide Common-Mode Range
• Functional Behavior Predictable Under All Supply Conditions
• VIO Input Allows for Direct Interfacing with 3.3V and 5V Microcontrollers
• Transceiver Disengages from the Bus when not powered
• RXD Recessive Clamping Detection
• Transmit Data (TXD) Dominant Time-Out Function
• Receive Only Mode for Node Diagnostics and Fault Confinement
• CANH/CANL Short Circuit and Overtemperature Protection
• High Electrostatic Discharge (ESD) Handling Protection on the Bus Pins
• Bus Pins Protected Against Transients in Automotive Environments
• VCC Undervoltage Detection with Open Drain Reset Output
• Undervoltage Detection on VIO Pin
• High-Voltage WAKE Input Pin
• Remote Wake-Up through CAN Bus (Wake-Up Pattern (WUP) acc. to ISO 11898-2:2016)
• Wake-Up Source Recognition
• CAN FD Transceiver Fully Compliant to SAE J2962-2

ESD according to IEC 62228-3, IEC61000-4-2: (330Ω/150 pF)
• Pins CANH, CANL ± 6kV
• Pins VS, WAKE ± 8kV

Voltage Regulator
• Integrated 5V, 150 mA Low Dropout Voltage Regulator
• ± 2% Accuracy
• Current limitation above 150 mA
• Max RDSON of output transistor 5Ω
• Short-Circuit protection
• Undervoltage detection
• Overvoltage protection
• Overtemperature protection

Functional Safety Support
• ISO 26262:2018 Functional Safety Ready up to ASIL B
• IEC 61508:2010 Functional Safety Ready up to SIL 2

Automotive Qualification
• Fulfills the OEM Hardware Requirements for CAN in Automotive Applications, Rev. 1.3
• AEC Q100 Qualified
• Ambient Temperature Grade 0: Tamb = -40°C to +150°C
• Available Packages: VDFN10 with Wettable Flanks (Moisture Sensitivity Level 1)