ATF1508AS-7AC100 [Microchip]

ATF1508AS-7AC100 Overview

128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a TQFP package.The device is programmed with 80 I/O ports.It is programmed to terminate devices at 100.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It is a part of the family Programmable Logic Devices.With 100 pins programmed, the chip is ready to use.3000 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 5V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 100.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.With a minimal supply voltage of 4.75V, it operates.Currently, there are 80 Programmable I/Os available.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 70°C.8 logic blocks (LABs) make up this circuit.If the maximal frequency is less than 166.7MHz, it should be lower than that.In programmable logic, a type of logic can be categorized as EE PLD.

ATF1508AS-7AC100 Features

TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

ATF1508AS-7AC100 Applications

There are a lot of Atmel (Microchip Technology)
ATF1508AS-7AC100 CPLDs applications.

• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate
• Address decoding
• D/T registers and latches
• Synchronous or asynchronous mode