ATF2500CL-20JC [Microchip]

ATF2500CL-20JC Overview

Currently, there are 24 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There are 24 I/Os on the board.Terminations of devices are set to 44.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family Programmable Logic Devices.It is recommended that the chip be packaged by Bulk.In this chip, the 44 pins are programmed.If you use this device, you will also find NO.For digital circuits, there are 2500 gates. These devices serve as building blocks.There are 40 pins on it.A power supply of 5V is required to operate it.In this case, the maximum supply voltage (Vsup) is 5.25V.The input signals are detected by 14 dedicated inputs.Vsup (supply voltage) must be greater than 4.75V.Ideally, its clock frequency should not exceed 33MHz.It is possible to classify programmable logic as EE PLD.It is recommended that the operating temperature be kept below 70°C.

ATF2500CL-20JC Features

24 I/Os
44 pin count
40 pins
5V power supplies

ATF2500CL-20JC Applications

There are a lot of Atmel (Microchip Technology)
ATF2500CL-20JC CPLDs applications.

• Bootloaders for FPGAs
• Address decoders
• Custom state machines
• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate