ATV2500BL-20JI [Microchip]

ATV2500BL-20JI Overview

Currently, there are 24 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a J package containing it.There are 24 I/Os on the board.Terminations of devices are set to 44.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family Programmable Logic Devices.In this chip, the 44 pins are programmed.For digital circuits, there are 2500 gates. These devices serve as building blocks.Optimal efficiency requires a supply voltage of 5V.For data storage, EPROM is adopted.A Through Hole is mounted on this electronic component.There are 44 pins on it.There is a maximum supply voltage of 5.5V when the device is operating.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.A power supply of 5V is required to operate it.It is recommended that the operating temperature exceeds -40°C.A temperature lower than 70°C is recommended for operation.The input signals are detected by 13 dedicated inputs.Maximum frequency should be less than 45MHz.It is possible to classify programmable logic as OT PLD.

ATV2500BL-20JI Features

J package
24 I/Os
44 pin count
44 pins
5V power supplies

ATV2500BL-20JI Applications

There are a lot of Atmel (Microchip Technology)
ATV2500BL-20JI CPLDs applications.

• Bootloaders for FPGAs
• Address decoders
• Custom state machines
• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate