Name: KSZ9131MNXC
Brand: Microchip
SKU: KSZ9131MNXC

KSZ9131MNXC [Microchip]

Part No:

KSZ9131MNXC

Communication & Networking ICs

Manufacturer:

Microchip

Description:

The KSZ9131 is an automotive integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver, with LinkMD cable diagnostics.

Package:

-

RoHS Status:

-

Datasheet:

-

Production Status:

In Stock Status:

Specification

Type

Parameter

Automotive

Yes

DownstreamPorts

Energy Efficient Ethernet

Yes

EtherCAT

Port Speed

10/100/1000Mbps

Fiber Support

HP Auto MDIX

Yes

On-Chip Termination

Yes

InterfaceUpStream

MII/RGMII/GMII

Internal Regulator

Yes

LinkMDCableDiag

Yes

MACsec

Supply Voltages

3.3

SyncE

Temperature Range Max

105

Temperature Range Min

-40

Digital I/O Voltage

1.8/2.5/3.3

WakeonLAN

Yes

IEEE 1588 v2

Products Detail

The KSZ9131 is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5, CAT-5e and CAT6 unshielded twisted pair (UTP) cable.

The KSZ9131RNX provides Reduced Gigabit Media Independent Interface RGMII and the KSZ9131MNX offers the industry-standard GMII/MII (Gigabit Media Independent Interface/Media Independent Interface) for connection to GMII/MII MACs in Gigabit Ethernet processors and switches for data transfer at 1000Mbps or 10/100Mbps.

The KSZ9131 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.

The KSZ9131 offers diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9131 I/Os and the board. The LinkMD^® TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths.

The standard KSZ9131RNX is available in the 48-pin, RoHS compliant QFN package, and the AEC-Q100 automotive qualified parts, KSZ9131RNXU and KSZ9131RNXV, are available in the 48-pin lead-RoHS compliant VQFN (wettable) package. The KSZ9131MNX is available in a 64-pin, RoHS Compliant QFN package.

Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver

GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os

Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)

On-chip termination resistors for the differential pairs

On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core

Jumbo frame support up to 16KB

125MHz Reference Clock Output

Energy-detect power-down mode for reduced power consumption when the cable is not attached

Wake-on-LAN (WOL) support with robust custom-packet detection

Programmable LED outputs for link, activity, and speed

Baseline wander correction

LinkMD® TDR-based cable diagnostic to identify faulty copper cabling

Parametric NAND tree support to detect faults between chip I/Os and board

Loopback modes for diagnostics

Automatic MDI/MDI-X crossover to detect and correct pair swap at all speeds of operation

MDC/MDIO management interface for PHY register configuration

Automatic detection and correction of pair swaps, pair skew, and pair polarity

Interrupt pin option

Power-down and power-saving modes

Available in 48-pin QFN (7mm x 7mm) and 64-pin QFN (8mm x 8mm) packages

Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V (external FET or regulator)
VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V
Transceiver (AVDDH): 3.3V or 2.5V (commercial temp)

Key Features

No key features available

Application scenarios

No application scenarios available

Documents

No documents available

RFQ

Looking for Pricing? Contact us for volume pricing.

Shipping & Warranty

Fast Dispatch: Ships in 5-7 days(in-stock parts within 1-2 days)

Unishop Global Export: 1-7 days, $40.00

Guaranteed Delivery: Door-to-door in 30 days

Compliant Worldwide Shipping: DHL, FedEx, SF, and UPS.

Feature

30-Day Guarantee
Fasted Delivery
Hassle-Free Returns
Secure payment method

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.