The LAN8830 is an integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5, CAT-5e and CAT6 unshielded twisted pair (UTP) cable.

The LAN8830 provides RGMII (Reduced Gigabit Media Independent Interface) for connection to Ethernet switches, Microcontrollers or Microprocessors with an embedded Ethernet Media Access Controller (MAC) supporting the RGMIII interface for data transfer at 1000Mbps or 10/100Mbps.

The LAN8830 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.

The LAN8830 offers diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between the LAN8830 I/Os and the board. The LinkMD^® TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths.

The LAN8830 is available in the 48-pin, RoHS compliant QFN package.

Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Operating Voltages
• Core (VDD, VDDAL, VDDAL_PLL): 1.1V (External FET or Regulator)
• VDD I/O (VDDIO): 3.3V, 2.5V, or 1.8V
• Transceiver (VDDAH): 3.3V or 2.5V