Name: LAN9218I-MT
Brand: Microchip
SKU: LAN9218I-MT

LAN9218I-MT [Microchip]

Part No:

LAN9218I-MT

Communication & Networking ICs

Manufacturer:

Microchip

Description:

The LAN9218(i) is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications and has been specifically architected to provide the highest performance.

Package:

-

RoHS Status:

-

Datasheet:

-

Production Status:

In Stock Status:

Specification

Type

Parameter

Checksum Offload

DownstreamPorts

ESD Rating

Port Speed

10/100Mbps

Fiber Support

I/O Pins

Interrupt Pin

LEDS

LinkMDCableDiag

Mixed Endian

NoofEtherPorts

Number of VLANs

OpVoltage

Supply Voltages

TX/RX Ram Buffer

16K

Temperature Range Max

Temperature Range Min

-40

Digital I/O Voltage

3.3

Products Detail

The LAN9218(i) is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9218(i) has been specifically architected to provide the highest performance possible for any given architecture. The LAN9218(i) is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant, and supports HP Auto-MDIX.

The LAN9218(i) includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit and 32-bit microprocessors and microcontrollers. The LAN9218(i) includes large transmit and receive data FIFOs with a high-speed host bus interface to accommodate high bandwidth, high latency applications. In addition, the LAN9218(i) memory buffer architecture allows the most efficient use of memory resources by optimizing packet granularity.

The 93AA46AE48 EEPROM device from Microchip comes with a factory programmed, globally unique EUI-48™ MAC Address. This Ethernet controller will automatically detect and load the EUI-48™ node address from the 93AA46AE48 EEPROM at start-up or reset.

Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Optimized for the highest performance applications

Efficient architecture with low CPU overhead

Easily interfaces to most 32-bit and 16-bit embedded CPU’s

Integrated PHY with HP Auto-MDIX Support

Supports audio & video streaming over Ethernet: multiple high-definition (HD) MPEG2 streams

Highest performing non-PCI Ethernet controller

32-bit interface with fast bus cycle times

Burst-mode read support

Internal buffer memory can store over 200 packets

Automatic PAUSE and back-pressure flow control

Supports Slave-DMA

Interrupt Pin with Programmable Hold-off timer

Reduces system cost and increases design flexibility

SRAM-like interface easily interfaces to most Embedded CPU's or SoC's

Numerous power management modes

Wake on LAN*

Magic packet wakeup*

Wakeup indicator event signal

Link Status Change

Fully compliant with IEEE 802.3/802.3u standards

Integrated Ethernet MAC and PHY

10BASE-T and 100BASE-TX support

Full- and Half-duplex support

Full-duplex flow control

Backpressure for half-duplex flow control

Preamble generation and removal

Automatic 32-bit CRC generation and checking

Automatic payload padding and pad removal

Loop-back modes

One 48-bit perfect address

64 hash-filtered multicast addresses

Pass all multicast

Promiscuous mode

Inverse filtering

Pass all incoming with status report

Disable reception of broadcast packets

Supports HP Auto-MDIX

Auto-negotiation

Supports energy-detect power down

Simple, SRAM-like interface

32 or 16-bit data bus

16Kbyte FIFO with flexible TX/RX allocation

One configurable host interrupt

Low-profile 100-pin TQFP, RoHS Compliant package

General Purpose Timer

Optional EEPROM interface

Support for 3 status LEDs multiplexed with Programmable GPIO signals

Single 3.3V Power Supply with 5V tolerant I/O

Commercial and Industrial (LAN9218i) Temperature Support

Video distribution systems, multi-room PVR
Cable, satellite, and IP set-top boxes
Digital video recorders and DVD recorder/players
Digital TV
Digital media clients/servers and home gateways
Video-over IP Solutions, IP PBX & video phones
Wireless routers & access points
High-end audio distribution systems

Key Features

No key features available

Application scenarios

No application scenarios available

Documents

No documents available

RFQ

Looking for Pricing? Contact us for volume pricing.

Shipping & Warranty

Fast Dispatch: Ships in 5-7 days(in-stock parts within 1-2 days)

Unishop Global Export: 1-7 days, $40.00

Guaranteed Delivery: Door-to-door in 30 days

Compliant Worldwide Shipping: DHL, FedEx, SF, and UPS.

Feature

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.