MAX24310EXG2 [Microchip]

The MAX24310 is an flexible, high-performance timing and clock synthesizer ICs that include a DPLL and two independent APLLs. When locked to one of two input clock signals, the device performs any-to-any frequency conversion. From any input clock frequency 1Hz to 750MHz the device can produce frequency-locked APLL output frequencies up to 750MHz and as many as 10 output clock signals that are integer divisors of the APLL frequencies. Input jitter can be attenuated by an internal low-bandwidth DPLL. The DPLL also provides truly hitless switching between input clocks and a high-resolution holdover capability. Input switching can be manual or automatic. Using only a low-cost crystal or oscillator, the device can also serve as frequency synthesizer IC. Output jitter is typically 0.18 to 0.3ps RMS for an APLL-only integer multiply and 0.25 to 0.4ps RMS for APLL-only fractional multiply or DPLL+APLL operation.

For telecom systems, the device has all required features and functions to serve as a central timing function or as a line card timing IC. With a suitable oscillator the device meets the requirements of Stratum 2, 3E, 3, 4E, and 4; G.812 Types I to IV; G.813; and G.8262.

Click here for secure documentation

Input Clocks
• One Crystal Input
• Three Differential or CMOS/TTL Inputs
• Differential to 750MHz, CMOS/TTL to 160MHz
• Continuous Input Clock Quality Monitoring
• Automatic or Manual Clock Selection
• Hitless Reference Switching on Loss of Input

Low-Bandwidth DPLL
• Programmable Bandwidth, 0.5mHz to 400Hz
• Attenuates Jitter up to Several UI
• Free-Run or Holdover on Loss of All Inputs
• Hitless Reference Switching on Loss of Input
• Manual Phase Adjustment

Two APLLs Plus 10 Output Clocks
• APLLs Perform High Resolution Fractional-N Clock Multiplication
• Any Output Frequency from <1Hz to 750MHz
• Each Output Has an Independent Divider
• Output Jitter 0.18 to 0.3ps RMS for APLL-only Integer Multiply and 0.25 to 0.4ps RMS for Other Modes (12kHz to 20MHz)
• Outputs are CML or 2xCMOS, Can Interface to CML, LVDS, LVPECL, CMOS, HSTL, SSTL and HCSL
• CMOS Output Voltage from 1.5V to 3.3V

General Features
• Suitable Line Card IC or Timing Card IC for Stratum 2/3E/3/4E/4, SMC, SEC/EEC, or SSU
• Automatic Self-Configuration at Power-Up from Internal EEPROM Memory
• Uses External Crystal, Oscillator or Clock Signal As Master Clock
• Internal Compensation for Local Oscillator Frequency Error
• SPI Processor Interface
• 1.8V + 3.3V Operation (5V Tolerant)
• -40 to +85°C Operating Temp. Range

Applications/Uses
• Frequency Conversion and Synthesis Applications in a Wide Variety of Equipment Types
• Telecom Timing Cards or Line Cards for SONET/SDH, Synchronous Ethernet and/or OTN