MIC910YM5-TR [Microchip]

MIC910YM5-TR Overview

A SC-74A, SOT-753 case is used to package the op amp. Voltage Feedback-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There are 5 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 2.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 1 elements in this linear amplifier. As a recommendation, this electronic component should be used with a power supply that can deliver 2.5mA. I would like to point out that this electrical component is capable of working from a voltage below 9V as far as the power supply is concerned. The dual supply voltage of 9V should be used for the conduct of this electronic component. In total, there are 1 op amps on the device.

MIC910YM5-TR Features

71dB voltage gain

MIC910YM5-TR Applications

There are a lot of Microchip Technology
MIC910YM5-TR Instrumentational OP Amps applications.

• Addition operation circuits
• Subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement