SG2846N [Microchip]

SG2846N Overview

It comes in the 16-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8V~40V. Qualified to work in an dc switcher with -25°C~85°C TA. The switching controller can be switched at 1Hz~500kHz. dc dc regulators can be carried out with Through Hole. Current Limit, Enable provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. SG*846 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. This dc dc voltage regulator should be powered by a voltage of 8V. This dc to dc regulator accepts only 40V input voltage at most. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. DC switcher's Through Hole qualifies it for most applications and prototypes. 500kHz is the frequency of the switching controller. Dormant dc switchings use 17mA. Components may be damaged if their current is greater than 21mA.

SG2846N Features

Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 500kHz

SG2846N Applications

There are a lot of Microchip Technology
SG2846N DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment