74AC574SC [Onsemi]

74AC574SC Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is included in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 2V~6V. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74ACseries of FPGAs. You should not exceed 153MHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 40?A quiescent energy. You can search similar parts based on 74AC574. The input capacitance of this JK flip flopis 4.5pF farads. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. 8bits are used in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. With an output current of 24mA, it is possible to design the device in any way you want. In order to operate, the chip has 3 output lines. This input has 1lines. -24mAis set as the high level output current. There is no low level output current set at 24mA. Temperatures below 85°Care ideal for operating. Temperatures above -40°Cshould be used. The minimum voltage required for operation is 2V. 6Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 153MHz.

74AC574SC Features

Tube package
74AC series
20 pins
8 Bits

74AC574SC Applications

There are a lot of ON Semiconductor
74AC574SC Flip Flops applications.

• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory
• Event Detectors
• Data Synchronizers
• Asynchronous counter
• Modulo ? n ? counter