74AC74PC [Onsemi]

74AC74PC Overview

The package is in the form of 14-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. In the configuration, Differentialis used as the output. This trigger uses the value Positive Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74AC series. In order for it to function properly, its output frequency should not exceed 160MHz. The element count is 2 . It consumes 20?A of quiescent The 74AC74 family contains this object. A 4.5pFfarad input capacitance is provided by this T flip flop. It is mounted in the way of Through Hole. There are 14pins on it. The clock edge trigger type for this device is Positive Edge. An electronic part with 2bits has been designed. In order to achieve its superior flexibility, 2 circuits are used. The 24mA output current allows it to be designed with the greatest amount of flexibility. There are no output lines on the JK flip flop. 4input lines are available for you to choose from. A high level output current of -24mAis set. In the low level output current setting, the current is set to 24mA. Ideally, the operating temperature should be below 85°C. If the operating temperature is higher than -40°C, the system should operate properly. In order for it to operate, a supply voltage of 2Vis required. A maximum voltage of 6V can be provided by it. This frequency can be achieved at 160MHz. 2 gates are contained in its basic building block. There are 1 inputs involved.

74AC74PC Features

Tube package
74AC series
14 pins
2 Bits
2 gates

74AC74PC Applications

There are a lot of ON Semiconductor
74AC74PC Flip Flops applications.

• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division