74F373PC [Onsemi]

74F373PC Overview

In the 20-DIP (0.300, 7.62mm) package, it is embedded. The package is in the form of Tube. It uses Tri-State as the output. This electrical device has a logic type of D-Type Transparent Latch. According to Through Hole, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. The 74F series is associated with this FPGA. There are 8 bits in this electronic part. The family it belongs to is 74F373. The 20 pins are designed into it. Through Hole is used to mount this electronic part. Electronic circuits comprise 8 input lines. The output current of 24mA makes it feature maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. The binary equivalent of the input line is generated by 3 output lines. Without external influences, it consumes 38mA quiescent current. There are 1 elements in it. Its superior flexibility is achieved by using 8 circuits. 24mA is the low level output current. -3mA is the high level output current. Ideally, the operating temperature should be lower than 70°C. It is recommended to operate at a temperature higher than 0°C. The maximum supply voltage is 5.5V. With a minimum supply voltage of 4.5V, it operates.

74F373PC Features

20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F373 family
20 pins
1 elements

74F373PC Applications

There are a lot of ON Semiconductor
74F373PC Latches applications.

• Hammer Device Information
• Relay
• Network Switches
• TV Set-top Boxes
• Motor Drives
• PCs and Notebooks
• Hammer
• Parallel data storage
• Digital bus buffer
• Flip-flops