74ACT377SC [Onsemi]

74ACT377SC Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74ACT series. This D flip flop should not have a frequency greater than 175MHz. A total of 1elements are present in it. There is 40?A quiescent consumption. The 74ACT377 family contains it. This T flip flop has a capacitance of 4.5pF farads at the input. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 8output lines. A total of 8input lines have been provided. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 175MHz.

74ACT377SC Features

Tube package
74ACT series
20 pins
8 Bits

74ACT377SC Applications

There are a lot of ON Semiconductor
74ACT377SC Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory