74F112SCX [Onsemi]

74F112SCX Overview

16-SOIC (0.154, 3.90mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). Differentialis the output configured for it. JK flip flop uses Negative Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Currently, the operating temperature is 0°C~70°C TA. JK Typeis the type of this D latch. The 74Fseries comprises this type of FPGA. It should not exceed 105MHzin terms of its output frequency. In total, it contains 2 elements. Despite external influences, it consumes 19mAof quiescent current. The object belongs to the 74F112 family. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. A Negative Edgeclock edge trigger is used in this device. Flip flops designed with 2bits are used in this part. To achieve this superior flexibility, 2 circuits are used. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 3 output lines on it. Currently, there are 2 lines of input. There is -1mA output current at the high level. There is 20mA output current at the low level. It is recommended that the operating temperature be lower than 70°C. A temperature above 0°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. 80MHzis the maximum frequency that can be achieved.

74F112SCX Features

Tape & Reel (TR) package
74F series
16 pins
2 Bits

74F112SCX Applications

There are a lot of ON Semiconductor
74F112SCX Flip Flops applications.

• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers