FPF1018 [Onsemi]

FPF1018 Overview

The package is in the form of a Tape & Reel (TR).It is included in the package 6-VDFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.It is part of the FPF1018 family of LED drivers.It contains 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.This results in the maximum output current dropping to 1.5A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 45mOhm resistance are used.A component of this type is included in the IntelliMAX? series.This case results in a 1.5A output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 1.8V.There is a maximum input voltage of 1.8V volts.The input voltage minimum is 800mV volts.There is a maximum current requirement of 1?A for its operation.

FPF1018 Features

Resistance of 45mOhm

FPF1018 Applications

There are a lot of ON Semiconductor
FPF1018 Power Switches ICs applications.

• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD