L272AD2 [Onsemi]

L272AD2 Overview

It is packaged in an SOP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 12V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifiers op amp ic can be identified by the fact that this is a type of Operational Amplifiers device. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 30mV for input offset voltage. A supply current of 8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 75dB. This instrumentation amplifier cannot operate below -25°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 2 elements in this buffer amplifier. An buffer amplifier is packed in a TUBE-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 28V, which is suitable. Keeping the linear amplifier's supply voltage above 4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 14V volts.

L272AD2 Features

16 Pins
supply voltage of 12V
75dB voltage gain

L272AD2 Applications

There are a lot of Fairchild (ON Semiconductor)
L272AD2 Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering