MC100EP14DTR2 [Onsemi]

MC100EP14DTR2 Overview

The clock divider is available in 20-TSSOP (0.173, 4.40mm Width) case. There is a Tape & Reel (TR) package attached to it. It is normal to operate with a value of 2GHz. A total of 20 terminations are present. Supply voltages of 3.3V enable high efficiency. As you can see, it is mounted by Surface Mount. An electronic component classified as Fanout Buffer (Distribution), Multiplexer is categorized as such. Set the temperature to -40°C~85°C for reliable performance. The clock switch should be able to be powered by a 3V~5.5V V source. This item is positioned in the way of Surface Mount. There is a pin count of 20 on timeing clock. There is an output of ECL, PECL. The 20 pins are used for operation. This object belongs to the MC100EP14 family. The cut smart buffer you are looking for is contained within Clock Drivers. There is 5.5V maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 3V in order for the clock divider to operate normally. A -4.5V volt supply powers it. Electronic components of the 100EP series are included in this package. As a result of using this gadget, you will also be able to obtain NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V.

MC100EP14DTR2 Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC100EP14DTR2 Applications

There are a lot of ON Semiconductor
MC100EP14DTR2 Clock Buffers & Drivers applications.

• Machine made
• Clock signal duplication
• Clock signal format conversion
• Clock signal level shifting
• High performance communication system
• Data center
• Cloud computing
• Network
• High speed industry
• High-end consumer electronics