NDS9400A [Onsemi]

NDS9400A Overview

As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 350pF @ 10V.This device conducts a continuous drain current (ID) of 3.4A, which is the maximum continuous current transistor can conduct.Using VGS=-30V and a specified value of ID, the drain-source breakdown voltage is VDS at which a specified value of ID flows. This device has a drain-source breakdown voltage of -30V (that is, no charge flow from drain to source).When the device is turned off, a turn-off delay time of 21 ns occurs as the input capacitance charges before drain current conduction commences.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 20V.This transistor requires a drain-source voltage (Vdss) of 30V.In order to reduce power consumption, this device uses a drive voltage of 4.5V 10V volts (4.5V 10V).

NDS9400A Features

a continuous drain current (ID) of 3.4A
a drain-to-source breakdown voltage of -30V voltage
the turn-off delay time is 21 ns
a 30V drain to source voltage (Vdss)

NDS9400A Applications

There are a lot of ON Semiconductor
NDS9400A applications of single MOSFETs transistors.

• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching