AN30888B-VB [Panasonic]

AN30888B-VB Overview

There is also a 16-VFQFN package that is used to save space on the board. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Controller emerges with high efficiency and reliability.If the led driver ic is set to -25°C~85°C TA, it will work normally.Backlight, Lighting has many advantages.It operates on the basis of the frequency of 1.5MHz.This LED driver is configured with a base of 16 pins.If the voltage supply is below 3V, undetermined failures may occur.It is estimated that there are 4 segments.It's mounted by Surface Mount.Under the base part number AN30888, you will find this LED driver.Ideally, the supply voltage should be 15V.An optimized supply voltage of 15V is provided.It operates at a voltage of 3V as its minimal input voltage.Supply current cannot exceed 15V.With a minimum supply current less than 10?A, this device achieves high efficiency.Temperatures should not exceed 85°C in order to ensure stable operation.There is no current available to supply to the load.Maintaining a temperature above -25°C is essential for stabilizing operation.The electronic component can fully perform its functions if the switching frequency is maintained at 1.5MHz.This device has a voltage output of 5.2V volts.

AN30888B-VB Features

Available in the 16-VFQFN package
Operating temperature of -25°C~85°C TA
Frequency of 1.5MHz
Switching frequency of 1.5MHz
Output voltage of 5.2V

AN30888B-VB Applications

There are a lot of Panasonic Electronic Components
AN30888B-VB LED Driver ICs applications.

• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices