BD2065AFJ-E2 [ROHM]

BD2065AFJ-E2 Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the BD206*A family.A total of 8 terminations can be found in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 8 pins.In this case, there is 100MOhm resistance in the LED driving board.This results in a 1A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.It has a power supply of 5V.The maximum input voltage of the LED driver is 5.5V volts.

BD2065AFJ-E2 Features

Supplied from 5V
Resistance of 100MOhm

BD2065AFJ-E2 Applications

There are a lot of ROHM Semiconductor
BD2065AFJ-E2 Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD