Part No:
BD37A19FVM-TR
Category:
Power Management ICs
Description:
5V 8 Terminals 8-Pin BD37A19 Voltage supervisor 1 Channels Min 1V Max 10V
Package:
-
Datasheet:
-
Production Status:
In Stock Status:
Specification
Package / Case
8-VSSOP, 8-MSOP (0.110, 2.80mm Width)
Moisture Sensitivity Level (MSL)
Output
Open Drain or Open Collector
Number of Voltages Monitored
Min Reset Threshold Voltage
Max Reset Threshold Voltage
Products Detail
BD37A19FVM-TR Overview
It is mounted through 8 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Watchdog Circuit products. During operation, the power ic is supplied with a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 5μA. If you want to search for similar IC managements of this manufacturer, you can always refer to BD37A19, which is the base power ics number. There is a requirement for 5V power to power this power management. The maximum supply temperature that PMIC chip can work with is 14μA.
BD37A19FVM-TR Features
Watchdog Circuit type
Minimum supply voltage of 1V
5μA operating supply current
BD37A19FVM-TR Applications
There are a lot of ROHM Semiconductor
BD37A19FVM-TR Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
Key Features
No key features available
Application scenarios
No application scenarios available
Documents