BD9207FPS-E2 [ROHM]

BD9207FPS-E2 Overview

As a result of its TO-252-5, DPak (4 Leads + Tab), TO-252AD package, it helps to save board space on the board. It has 1 outputs for LED drivers.We are using Surface Mount as the mounting method.With high efficiency, it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -20°C~85°C TA.It is clear that Backlight will benefit from the program.Using the frequency of 900kHz, it operates.In order for it to operate, it has 4 terminations.The base is configured with 5 pins.If the voltage supply is lower than 8V, undetermined failures may occur.This is mounted by Surface Mount.You can find this LED driver under the base part number BD9207.There are 4 pins on this device.1.5A is the maximum current the load can handle.Powering systems requires 35V voltages.When using the device, there is a voltage of 24V volts assigned to the circuit.Using an input voltage greater than or equal to 8V provides great convenience to its operation.

BD9207FPS-E2 Features

Available in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package
Operating temperature of -20°C~85°C TA
Frequency of 900kHz
Operating with the supply voltage of 35V

BD9207FPS-E2 Applications

There are a lot of ROHM Semiconductor
BD9207FPS-E2 LED Driver ICs applications.

• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Industrial LED Lighting: Image Recognition Devices
• Stage Lighting and Signage