74ACT16374TTR Overview

The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. It should not exceed 120MHzin its output frequency. In total, there are 2 elements. There is a consumption of 8?Aof quiescent energy. Currently, there are 48 terminations. The 74ACT163family includes it. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 3.6pFfarad input capacitance. Devices in the ACTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 48pins on it. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 8bits is used in this application. As soon as 5.5Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 4.5V. Its superior flexibility is attributed to its use of 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on 5Vvolts of power. A D flip flop with 2embedded ports is available. It has 3 output lines to operate.

74ACT16374TTR Features

Tape & Reel (TR) package
74ACT series
48 pins
8 Bits
5V power supplies

74ACT16374TTR Applications

There are a lot of STMicroelectronics
74ACT16374TTR Flip Flops applications.

• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory
• Event Detectors
• Data Synchronizers